Shree Ram Pump & Pipe

Centrifugal Monoblock Pump - LBH

Features :

·   Pump Casing : It is made of close grained cast iron of high tensile strength and has a very  smooth surface finish for low friction losses. 

·  Impeller : It is enclosed and is made of close grained cast iron with a very smooth surface finish for high efficiency.

·  Stuffing Box : It is water lubricated and is sufficiently deep. It is Packed with graphite Packings. (For LBH & LBL Series)

·  Mechanical Seal : Superior Mechanical Shaft Seal for longer life & effective sealing against water leakage. (For LBI Series)

·  Flanges : Companion Flanges are provided for connecting the suction and delivery pipes.

·  Stator Frame : It is made of close grained cast iron and has adequate numbers of cooling fins to keep the stator temperature rise within limits.

·  Stator : Vacuum Impregnated with polyester base copper wire and insulation.

·  Rotor : Rotor is aluminium die-casted. Rotor shaft is made of carbon steel and is of adequate size to transmit power to the impeller. It is provided with a replaceable bronze shaft sleeve to protect the shaft from wear.

·  Fan : It is made of Cast Iron and is designed to give a good air flow over the stator frame.

·  Bearings : They are grease lubricated and of ample size to withstand radial and axial thrust loads.

·  Terminal Box : It is of ample size to facilitate easy wiring.

Variety & Range

●        Flow Range : up to 156 m³/h

●        Head Range : up to 100 metres

●        Rating : 1 phase – 2.20 to 3.70 kW & 3 phase – 1.50 to 22.0 kW

●        Rated Speed : 2900 RPM

Applications :

• Agriculture
• Industrial
• Commercial

Centrifugal Monoblock Pump - LBH

Features :

·   Pump Casing : It is made of close grained cast iron of high tensile strength and has a very  smooth surface finish for low friction losses. 

·  Impeller : It is enclosed and is made of close grained cast iron with a very smooth surface finish for high efficiency.

·  Stuffing Box : It is water lubricated and is sufficiently deep. It is Packed with graphite Packings. (For LBH & LBL Series)

·  Mechanical Seal : Superior Mechanical Shaft Seal for longer life & effective sealing against water leakage. (For LBI Series)

·  Flanges : Companion Flanges are provided for connecting the suction and delivery pipes.

·  Stator Frame : It is made of close grained cast iron and has adequate numbers of cooling fins to keep the stator temperature rise within limits.

·  Stator : Vacuum Impregnated with polyester base copper wire and insulation.

·  Rotor : Rotor is aluminium die-casted. Rotor shaft is made of carbon steel and is of adequate size to transmit power to the impeller. It is provided with a replaceable bronze shaft sleeve to protect the shaft from wear.

·  Fan : It is made of Cast Iron and is designed to give a good air flow over the stator frame.

·  Bearings : They are grease lubricated and of ample size to withstand radial and axial thrust loads.

·  Terminal Box : It is of ample size to facilitate easy wiring.

Variety & Range

●        Flow Range : up to 156 m³/h

●        Head Range : up to 100 metres

●        Rating : 1 phase – 2.20 to 3.70 kW & 3 phase – 1.50 to 22.0 kW

●        Rated Speed : 2900 RPM

Applications :

• Agriculture
• Industrial
• Commercial

Centrifugal Monoblock Pump - LBH

Features :

·   Pump Casing : It is made of close grained cast iron of high tensile strength and has a very  smooth surface finish for low friction losses. 

·  Impeller : It is enclosed and is made of close grained cast iron with a very smooth surface finish for high efficiency.

·  Stuffing Box : It is water lubricated and is sufficiently deep. It is Packed with graphite Packings. (For LBH & LBL Series)

·  Mechanical Seal : Superior Mechanical Shaft Seal for longer life & effective sealing against water leakage. (For LBI Series)

·  Flanges : Companion Flanges are provided for connecting the suction and delivery pipes.

·  Stator Frame : It is made of close grained cast iron and has adequate numbers of cooling fins to keep the stator temperature rise within limits.

·  Stator : Vacuum Impregnated with polyester base copper wire and insulation.

·  Rotor : Rotor is aluminium die-casted. Rotor shaft is made of carbon steel and is of adequate size to transmit power to the impeller. It is provided with a replaceable bronze shaft sleeve to protect the shaft from wear.

·  Fan : It is made of Cast Iron and is designed to give a good air flow over the stator frame.

·  Bearings : They are grease lubricated and of ample size to withstand radial and axial thrust loads.

·  Terminal Box : It is of ample size to facilitate easy wiring.

Variety & Range

●        Flow Range : up to 156 m³/h

●        Head Range : up to 100 metres

●        Rating : 1 phase – 2.20 to 3.70 kW & 3 phase – 1.50 to 22.0 kW

●        Rated Speed : 2900 RPM

Applications :

• Agriculture
• Industrial
• Commercial

Centrifugal Monoblock Pump - LBH

Features :

·   Pump Casing : It is made of close grained cast iron of high tensile strength and has a very  smooth surface finish for low friction losses. 

·  Impeller : It is enclosed and is made of close grained cast iron with a very smooth surface finish for high efficiency.

·  Stuffing Box : It is water lubricated and is sufficiently deep. It is Packed with graphite Packings. (For LBH & LBL Series)

·  Mechanical Seal : Superior Mechanical Shaft Seal for longer life & effective sealing against water leakage. (For LBI Series)

·  Flanges : Companion Flanges are provided for connecting the suction and delivery pipes.

·  Stator Frame : It is made of close grained cast iron and has adequate numbers of cooling fins to keep the stator temperature rise within limits.

·  Stator : Vacuum Impregnated with polyester base copper wire and insulation.

·  Rotor : Rotor is aluminium die-casted. Rotor shaft is made of carbon steel and is of adequate size to transmit power to the impeller. It is provided with a replaceable bronze shaft sleeve to protect the shaft from wear.

·  Fan : It is made of Cast Iron and is designed to give a good air flow over the stator frame.

·  Bearings : They are grease lubricated and of ample size to withstand radial and axial thrust loads.

·  Terminal Box : It is of ample size to facilitate easy wiring.

Variety & Range

●        Flow Range : up to 156 m³/h

●        Head Range : up to 100 metres

●        Rating : 1 phase – 2.20 to 3.70 kW & 3 phase – 1.50 to 22.0 kW

●        Rated Speed : 2900 RPM

Applications :

• Agriculture
• Industrial
• Commercial

Centrifugal Monoblock Pump - LBH

Features :

·   Pump Casing : It is made of close grained cast iron of high tensile strength and has a very  smooth surface finish for low friction losses. 

·  Impeller : It is enclosed and is made of close grained cast iron with a very smooth surface finish for high efficiency.

·  Stuffing Box : It is water lubricated and is sufficiently deep. It is Packed with graphite Packings. (For LBH & LBL Series)

·  Mechanical Seal : Superior Mechanical Shaft Seal for longer life & effective sealing against water leakage. (For LBI Series)

·  Flanges : Companion Flanges are provided for connecting the suction and delivery pipes.

·  Stator Frame : It is made of close grained cast iron and has adequate numbers of cooling fins to keep the stator temperature rise within limits.

·  Stator : Vacuum Impregnated with polyester base copper wire and insulation.

·  Rotor : Rotor is aluminium die-casted. Rotor shaft is made of carbon steel and is of adequate size to transmit power to the impeller. It is provided with a replaceable bronze shaft sleeve to protect the shaft from wear.

·  Fan : It is made of Cast Iron and is designed to give a good air flow over the stator frame.

·  Bearings : They are grease lubricated and of ample size to withstand radial and axial thrust loads.

·  Terminal Box : It is of ample size to facilitate easy wiring.

Variety & Range

●        Flow Range : up to 156 m³/h

●        Head Range : up to 100 metres

●        Rating : 1 phase – 2.20 to 3.70 kW & 3 phase – 1.50 to 22.0 kW

●        Rated Speed : 2900 RPM

Applications :

• Agriculture
• Industrial
• Commercial

Centrifugal Monoblock Pump - LBH

Features :

·   Pump Casing : It is made of close grained cast iron of high tensile strength and has a very  smooth surface finish for low friction losses. 

·  Impeller : It is enclosed and is made of close grained cast iron with a very smooth surface finish for high efficiency.

·  Stuffing Box : It is water lubricated and is sufficiently deep. It is Packed with graphite Packings. (For LBH & LBL Series)

·  Mechanical Seal : Superior Mechanical Shaft Seal for longer life & effective sealing against water leakage. (For LBI Series)

·  Flanges : Companion Flanges are provided for connecting the suction and delivery pipes.

·  Stator Frame : It is made of close grained cast iron and has adequate numbers of cooling fins to keep the stator temperature rise within limits.

·  Stator : Vacuum Impregnated with polyester base copper wire and insulation.

·  Rotor : Rotor is aluminium die-casted. Rotor shaft is made of carbon steel and is of adequate size to transmit power to the impeller. It is provided with a replaceable bronze shaft sleeve to protect the shaft from wear.

·  Fan : It is made of Cast Iron and is designed to give a good air flow over the stator frame.

·  Bearings : They are grease lubricated and of ample size to withstand radial and axial thrust loads.

·  Terminal Box : It is of ample size to facilitate easy wiring.

Variety & Range

●        Flow Range : up to 156 m³/h

●        Head Range : up to 100 metres

●        Rating : 1 phase – 2.20 to 3.70 kW & 3 phase – 1.50 to 22.0 kW

●        Rated Speed : 2900 RPM

Applications :

• Agriculture
• Industrial
• Commercial

Centrifugal Monoblock Pump - LBH

Features :

·   Pump Casing : It is made of close grained cast iron of high tensile strength and has a very  smooth surface finish for low friction losses. 

·  Impeller : It is enclosed and is made of close grained cast iron with a very smooth surface finish for high efficiency.

·  Stuffing Box : It is water lubricated and is sufficiently deep. It is Packed with graphite Packings. (For LBH & LBL Series)

·  Mechanical Seal : Superior Mechanical Shaft Seal for longer life & effective sealing against water leakage. (For LBI Series)

·  Flanges : Companion Flanges are provided for connecting the suction and delivery pipes.

·  Stator Frame : It is made of close grained cast iron and has adequate numbers of cooling fins to keep the stator temperature rise within limits.

·  Stator : Vacuum Impregnated with polyester base copper wire and insulation.

·  Rotor : Rotor is aluminium die-casted. Rotor shaft is made of carbon steel and is of adequate size to transmit power to the impeller. It is provided with a replaceable bronze shaft sleeve to protect the shaft from wear.

·  Fan : It is made of Cast Iron and is designed to give a good air flow over the stator frame.

·  Bearings : They are grease lubricated and of ample size to withstand radial and axial thrust loads.

·  Terminal Box : It is of ample size to facilitate easy wiring.

Variety & Range

●        Flow Range : up to 156 m³/h

●        Head Range : up to 100 metres

●        Rating : 1 phase – 2.20 to 3.70 kW & 3 phase – 1.50 to 22.0 kW

●        Rated Speed : 2900 RPM

Applications :

• Agriculture
• Industrial
• Commercial

Centrifugal Monoblock Pump - LBH

Features :

·   Pump Casing : It is made of close grained cast iron of high tensile strength and has a very  smooth surface finish for low friction losses. 

·  Impeller : It is enclosed and is made of close grained cast iron with a very smooth surface finish for high efficiency.

·  Stuffing Box : It is water lubricated and is sufficiently deep. It is Packed with graphite Packings. (For LBH & LBL Series)

·  Mechanical Seal : Superior Mechanical Shaft Seal for longer life & effective sealing against water leakage. (For LBI Series)

·  Flanges : Companion Flanges are provided for connecting the suction and delivery pipes.

·  Stator Frame : It is made of close grained cast iron and has adequate numbers of cooling fins to keep the stator temperature rise within limits.

·  Stator : Vacuum Impregnated with polyester base copper wire and insulation.

·  Rotor : Rotor is aluminium die-casted. Rotor shaft is made of carbon steel and is of adequate size to transmit power to the impeller. It is provided with a replaceable bronze shaft sleeve to protect the shaft from wear.

·  Fan : It is made of Cast Iron and is designed to give a good air flow over the stator frame.

·  Bearings : They are grease lubricated and of ample size to withstand radial and axial thrust loads.

·  Terminal Box : It is of ample size to facilitate easy wiring.

Variety & Range

●        Flow Range : up to 156 m³/h

●        Head Range : up to 100 metres

●        Rating : 1 phase – 2.20 to 3.70 kW & 3 phase – 1.50 to 22.0 kW

●        Rated Speed : 2900 RPM

Applications :

• Agriculture
• Industrial
• Commercial

Centrifugal Monoblock Pump - LBH

Features :

·   Pump Casing : It is made of close grained cast iron of high tensile strength and has a very  smooth surface finish for low friction losses. 

·  Impeller : It is enclosed and is made of close grained cast iron with a very smooth surface finish for high efficiency.

·  Stuffing Box : It is water lubricated and is sufficiently deep. It is Packed with graphite Packings. (For LBH & LBL Series)

·  Mechanical Seal : Superior Mechanical Shaft Seal for longer life & effective sealing against water leakage. (For LBI Series)

·  Flanges : Companion Flanges are provided for connecting the suction and delivery pipes.

·  Stator Frame : It is made of close grained cast iron and has adequate numbers of cooling fins to keep the stator temperature rise within limits.

·  Stator : Vacuum Impregnated with polyester base copper wire and insulation.

·  Rotor : Rotor is aluminium die-casted. Rotor shaft is made of carbon steel and is of adequate size to transmit power to the impeller. It is provided with a replaceable bronze shaft sleeve to protect the shaft from wear.

·  Fan : It is made of Cast Iron and is designed to give a good air flow over the stator frame.

·  Bearings : They are grease lubricated and of ample size to withstand radial and axial thrust loads.

·  Terminal Box : It is of ample size to facilitate easy wiring.

Variety & Range

●        Flow Range : up to 156 m³/h

●        Head Range : up to 100 metres

●        Rating : 1 phase – 2.20 to 3.70 kW & 3 phase – 1.50 to 22.0 kW

●        Rated Speed : 2900 RPM

Applications :

• Agriculture
• Industrial
• Commercial

Centrifugal Monoblock Pump - LBH

Features :

·   Pump Casing : It is made of close grained cast iron of high tensile strength and has a very  smooth surface finish for low friction losses. 

·  Impeller : It is enclosed and is made of close grained cast iron with a very smooth surface finish for high efficiency.

·  Stuffing Box : It is water lubricated and is sufficiently deep. It is Packed with graphite Packings. (For LBH & LBL Series)

·  Mechanical Seal : Superior Mechanical Shaft Seal for longer life & effective sealing against water leakage. (For LBI Series)

·  Flanges : Companion Flanges are provided for connecting the suction and delivery pipes.

·  Stator Frame : It is made of close grained cast iron and has adequate numbers of cooling fins to keep the stator temperature rise within limits.

·  Stator : Vacuum Impregnated with polyester base copper wire and insulation.

·  Rotor : Rotor is aluminium die-casted. Rotor shaft is made of carbon steel and is of adequate size to transmit power to the impeller. It is provided with a replaceable bronze shaft sleeve to protect the shaft from wear.

·  Fan : It is made of Cast Iron and is designed to give a good air flow over the stator frame.

·  Bearings : They are grease lubricated and of ample size to withstand radial and axial thrust loads.

·  Terminal Box : It is of ample size to facilitate easy wiring.

Variety & Range

●        Flow Range : up to 156 m³/h

●        Head Range : up to 100 metres

●        Rating : 1 phase – 2.20 to 3.70 kW & 3 phase – 1.50 to 22.0 kW

●        Rated Speed : 2900 RPM

Applications :

• Agriculture
• Industrial
• Commercial

Centrifugal Monoblock Pump - LBH

Features :

·   Pump Casing : It is made of close grained cast iron of high tensile strength and has a very  smooth surface finish for low friction losses. 

·  Impeller : It is enclosed and is made of close grained cast iron with a very smooth surface finish for high efficiency.

·  Stuffing Box : It is water lubricated and is sufficiently deep. It is Packed with graphite Packings. (For LBH & LBL Series)

·  Mechanical Seal : Superior Mechanical Shaft Seal for longer life & effective sealing against water leakage. (For LBI Series)

·  Flanges : Companion Flanges are provided for connecting the suction and delivery pipes.

·  Stator Frame : It is made of close grained cast iron and has adequate numbers of cooling fins to keep the stator temperature rise within limits.

·  Stator : Vacuum Impregnated with polyester base copper wire and insulation.

·  Rotor : Rotor is aluminium die-casted. Rotor shaft is made of carbon steel and is of adequate size to transmit power to the impeller. It is provided with a replaceable bronze shaft sleeve to protect the shaft from wear.

·  Fan : It is made of Cast Iron and is designed to give a good air flow over the stator frame.

·  Bearings : They are grease lubricated and of ample size to withstand radial and axial thrust loads.

·  Terminal Box : It is of ample size to facilitate easy wiring.

Variety & Range

●        Flow Range : up to 156 m³/h

●        Head Range : up to 100 metres

●        Rating : 1 phase – 2.20 to 3.70 kW & 3 phase – 1.50 to 22.0 kW

●        Rated Speed : 2900 RPM

Applications :

• Agriculture
• Industrial
• Commercial