Shree Ram Pump & Pipe

Centrifugal Monoblock Pump - MDH

Features :

·     The laminations are non-oriented silicon steel & confirms to IS-648.

·     Volute, Impeller, Adaptor, Stator body, End shield shall be made of close-grained cast iron of high tensile strength and has a very smooth surface finish resulting in low friction losses.

·     Motor windings shall be vacuum impregnated with synthetic varnish for better moisture resistance.

·     Superior mechanical shaft seal for longer life and effective sealing against water leakage.

·     The electric rotor is pressure die cast & uses electric grade aluminium.

·     Grease Lubricated anti-friction ball bearings shall be fitted at both ends to withstand radial and axial loads.

·     They are precisely machined on modern machine tools to give you years of reliable operation.

·     Better insulating materials are used so that pumpset can with stand high temperature rise.

Variety & Range

●        Flow Range : up to 1035 LPM

●        Head Range : up to 42 metres

●        Rating : 0.37 to 2.2 kW

●        Rated Speed : 2900 RPM

Applications :

• Agriculture
• Industrial
• Commercial

Centrifugal Monoblock Pump - MDH

Features :

·     The laminations are non-oriented silicon steel & confirms to IS-648.

·     Volute, Impeller, Adaptor, Stator body, End shield shall be made of close-grained cast iron of high tensile strength and has a very smooth surface finish resulting in low friction losses.

·     Motor windings shall be vacuum impregnated with synthetic varnish for better moisture resistance.

·     Superior mechanical shaft seal for longer life and effective sealing against water leakage.

·     The electric rotor is pressure die cast & uses electric grade aluminium.

·     Grease Lubricated anti-friction ball bearings shall be fitted at both ends to withstand radial and axial loads.

·     They are precisely machined on modern machine tools to give you years of reliable operation.

·     Better insulating materials are used so that pumpset can with stand high temperature rise.

Variety & Range

●        Flow Range : up to 1035 LPM

●        Head Range : up to 42 metres

●        Rating : 0.37 to 2.2 kW

●        Rated Speed : 2900 RPM

Applications :

• Agriculture
• Industrial
• Commercial

Centrifugal Monoblock Pump - MDH

Features :

·     The laminations are non-oriented silicon steel & confirms to IS-648.

·     Volute, Impeller, Adaptor, Stator body, End shield shall be made of close-grained cast iron of high tensile strength and has a very smooth surface finish resulting in low friction losses.

·     Motor windings shall be vacuum impregnated with synthetic varnish for better moisture resistance.

·     Superior mechanical shaft seal for longer life and effective sealing against water leakage.

·     The electric rotor is pressure die cast & uses electric grade aluminium.

·     Grease Lubricated anti-friction ball bearings shall be fitted at both ends to withstand radial and axial loads.

·     They are precisely machined on modern machine tools to give you years of reliable operation.

·     Better insulating materials are used so that pumpset can with stand high temperature rise.

Variety & Range

●        Flow Range : up to 1035 LPM

●        Head Range : up to 42 metres

●        Rating : 0.37 to 2.2 kW

●        Rated Speed : 2900 RPM

Applications :

• Agriculture
• Industrial
• Commercial

Centrifugal Monoblock Pump - MDH

Features :

·     The laminations are non-oriented silicon steel & confirms to IS-648.

·     Volute, Impeller, Adaptor, Stator body, End shield shall be made of close-grained cast iron of high tensile strength and has a very smooth surface finish resulting in low friction losses.

·     Motor windings shall be vacuum impregnated with synthetic varnish for better moisture resistance.

·     Superior mechanical shaft seal for longer life and effective sealing against water leakage.

·     The electric rotor is pressure die cast & uses electric grade aluminium.

·     Grease Lubricated anti-friction ball bearings shall be fitted at both ends to withstand radial and axial loads.

·     They are precisely machined on modern machine tools to give you years of reliable operation.

·     Better insulating materials are used so that pumpset can with stand high temperature rise.

Variety & Range

●        Flow Range : up to 1035 LPM

●        Head Range : up to 42 metres

●        Rating : 0.37 to 2.2 kW

●        Rated Speed : 2900 RPM

Applications :

• Agriculture
• Industrial
• Commercial

Centrifugal Monoblock Pump - MDH

Features :

·     The laminations are non-oriented silicon steel & confirms to IS-648.

·     Volute, Impeller, Adaptor, Stator body, End shield shall be made of close-grained cast iron of high tensile strength and has a very smooth surface finish resulting in low friction losses.

·     Motor windings shall be vacuum impregnated with synthetic varnish for better moisture resistance.

·     Superior mechanical shaft seal for longer life and effective sealing against water leakage.

·     The electric rotor is pressure die cast & uses electric grade aluminium.

·     Grease Lubricated anti-friction ball bearings shall be fitted at both ends to withstand radial and axial loads.

·     They are precisely machined on modern machine tools to give you years of reliable operation.

·     Better insulating materials are used so that pumpset can with stand high temperature rise.

Variety & Range

●        Flow Range : up to 1035 LPM

●        Head Range : up to 42 metres

●        Rating : 0.37 to 2.2 kW

●        Rated Speed : 2900 RPM

Applications :

• Agriculture
• Industrial
• Commercial

Centrifugal Monoblock Pump - MDH

Features :

·     The laminations are non-oriented silicon steel & confirms to IS-648.

·     Volute, Impeller, Adaptor, Stator body, End shield shall be made of close-grained cast iron of high tensile strength and has a very smooth surface finish resulting in low friction losses.

·     Motor windings shall be vacuum impregnated with synthetic varnish for better moisture resistance.

·     Superior mechanical shaft seal for longer life and effective sealing against water leakage.

·     The electric rotor is pressure die cast & uses electric grade aluminium.

·     Grease Lubricated anti-friction ball bearings shall be fitted at both ends to withstand radial and axial loads.

·     They are precisely machined on modern machine tools to give you years of reliable operation.

·     Better insulating materials are used so that pumpset can with stand high temperature rise.

Variety & Range

●        Flow Range : up to 1035 LPM

●        Head Range : up to 42 metres

●        Rating : 0.37 to 2.2 kW

●        Rated Speed : 2900 RPM

Applications :

• Agriculture
• Industrial
• Commercial

Centrifugal Monoblock Pump - MDH

Features :

·     The laminations are non-oriented silicon steel & confirms to IS-648.

·     Volute, Impeller, Adaptor, Stator body, End shield shall be made of close-grained cast iron of high tensile strength and has a very smooth surface finish resulting in low friction losses.

·     Motor windings shall be vacuum impregnated with synthetic varnish for better moisture resistance.

·     Superior mechanical shaft seal for longer life and effective sealing against water leakage.

·     The electric rotor is pressure die cast & uses electric grade aluminium.

·     Grease Lubricated anti-friction ball bearings shall be fitted at both ends to withstand radial and axial loads.

·     They are precisely machined on modern machine tools to give you years of reliable operation.

·     Better insulating materials are used so that pumpset can with stand high temperature rise.

Variety & Range

●        Flow Range : up to 1035 LPM

●        Head Range : up to 42 metres

●        Rating : 0.37 to 2.2 kW

●        Rated Speed : 2900 RPM

Applications :

• Agriculture
• Industrial
• Commercial

Centrifugal Monoblock Pump - MDH

Features :

·     The laminations are non-oriented silicon steel & confirms to IS-648.

·     Volute, Impeller, Adaptor, Stator body, End shield shall be made of close-grained cast iron of high tensile strength and has a very smooth surface finish resulting in low friction losses.

·     Motor windings shall be vacuum impregnated with synthetic varnish for better moisture resistance.

·     Superior mechanical shaft seal for longer life and effective sealing against water leakage.

·     The electric rotor is pressure die cast & uses electric grade aluminium.

·     Grease Lubricated anti-friction ball bearings shall be fitted at both ends to withstand radial and axial loads.

·     They are precisely machined on modern machine tools to give you years of reliable operation.

·     Better insulating materials are used so that pumpset can with stand high temperature rise.

Variety & Range

●        Flow Range : up to 1035 LPM

●        Head Range : up to 42 metres

●        Rating : 0.37 to 2.2 kW

●        Rated Speed : 2900 RPM

Applications :

• Agriculture
• Industrial
• Commercial

Centrifugal Monoblock Pump - MDH

Features :

·     The laminations are non-oriented silicon steel & confirms to IS-648.

·     Volute, Impeller, Adaptor, Stator body, End shield shall be made of close-grained cast iron of high tensile strength and has a very smooth surface finish resulting in low friction losses.

·     Motor windings shall be vacuum impregnated with synthetic varnish for better moisture resistance.

·     Superior mechanical shaft seal for longer life and effective sealing against water leakage.

·     The electric rotor is pressure die cast & uses electric grade aluminium.

·     Grease Lubricated anti-friction ball bearings shall be fitted at both ends to withstand radial and axial loads.

·     They are precisely machined on modern machine tools to give you years of reliable operation.

·     Better insulating materials are used so that pumpset can with stand high temperature rise.

Variety & Range

●        Flow Range : up to 1035 LPM

●        Head Range : up to 42 metres

●        Rating : 0.37 to 2.2 kW

●        Rated Speed : 2900 RPM

Applications :

• Agriculture
• Industrial
• Commercial

Centrifugal Monoblock Pump - MDH

Features :

·     The laminations are non-oriented silicon steel & confirms to IS-648.

·     Volute, Impeller, Adaptor, Stator body, End shield shall be made of close-grained cast iron of high tensile strength and has a very smooth surface finish resulting in low friction losses.

·     Motor windings shall be vacuum impregnated with synthetic varnish for better moisture resistance.

·     Superior mechanical shaft seal for longer life and effective sealing against water leakage.

·     The electric rotor is pressure die cast & uses electric grade aluminium.

·     Grease Lubricated anti-friction ball bearings shall be fitted at both ends to withstand radial and axial loads.

·     They are precisely machined on modern machine tools to give you years of reliable operation.

·     Better insulating materials are used so that pumpset can with stand high temperature rise.

Variety & Range

●        Flow Range : up to 1035 LPM

●        Head Range : up to 42 metres

●        Rating : 0.37 to 2.2 kW

●        Rated Speed : 2900 RPM

Applications :

• Agriculture
• Industrial
• Commercial

Centrifugal Monoblock Pump - MDH

Features :

·     The laminations are non-oriented silicon steel & confirms to IS-648.

·     Volute, Impeller, Adaptor, Stator body, End shield shall be made of close-grained cast iron of high tensile strength and has a very smooth surface finish resulting in low friction losses.

·     Motor windings shall be vacuum impregnated with synthetic varnish for better moisture resistance.

·     Superior mechanical shaft seal for longer life and effective sealing against water leakage.

·     The electric rotor is pressure die cast & uses electric grade aluminium.

·     Grease Lubricated anti-friction ball bearings shall be fitted at both ends to withstand radial and axial loads.

·     They are precisely machined on modern machine tools to give you years of reliable operation.

·     Better insulating materials are used so that pumpset can with stand high temperature rise.

Variety & Range

●        Flow Range : up to 1035 LPM

●        Head Range : up to 42 metres

●        Rating : 0.37 to 2.2 kW

●        Rated Speed : 2900 RPM

Applications :

• Agriculture
• Industrial
• Commercial

Centrifugal Monoblock Pump - MDH

Features :

·     The laminations are non-oriented silicon steel & confirms to IS-648.

·     Volute, Impeller, Adaptor, Stator body, End shield shall be made of close-grained cast iron of high tensile strength and has a very smooth surface finish resulting in low friction losses.

·     Motor windings shall be vacuum impregnated with synthetic varnish for better moisture resistance.

·     Superior mechanical shaft seal for longer life and effective sealing against water leakage.

·     The electric rotor is pressure die cast & uses electric grade aluminium.

·     Grease Lubricated anti-friction ball bearings shall be fitted at both ends to withstand radial and axial loads.

·     They are precisely machined on modern machine tools to give you years of reliable operation.

·     Better insulating materials are used so that pumpset can with stand high temperature rise.

Variety & Range

●        Flow Range : up to 1035 LPM

●        Head Range : up to 42 metres

●        Rating : 0.37 to 2.2 kW

●        Rated Speed : 2900 RPM

Applications :

• Agriculture
• Industrial
• Commercial

Centrifugal Monoblock Pump - MDH

Features :

·     The laminations are non-oriented silicon steel & confirms to IS-648.

·     Volute, Impeller, Adaptor, Stator body, End shield shall be made of close-grained cast iron of high tensile strength and has a very smooth surface finish resulting in low friction losses.

·     Motor windings shall be vacuum impregnated with synthetic varnish for better moisture resistance.

·     Superior mechanical shaft seal for longer life and effective sealing against water leakage.

·     The electric rotor is pressure die cast & uses electric grade aluminium.

·     Grease Lubricated anti-friction ball bearings shall be fitted at both ends to withstand radial and axial loads.

·     They are precisely machined on modern machine tools to give you years of reliable operation.

·     Better insulating materials are used so that pumpset can with stand high temperature rise.

Variety & Range

●        Flow Range : up to 1035 LPM

●        Head Range : up to 42 metres

●        Rating : 0.37 to 2.2 kW

●        Rated Speed : 2900 RPM

Applications :

• Agriculture
• Industrial
• Commercial

Centrifugal Monoblock Pump - MDH

Features :

·     The laminations are non-oriented silicon steel & confirms to IS-648.

·     Volute, Impeller, Adaptor, Stator body, End shield shall be made of close-grained cast iron of high tensile strength and has a very smooth surface finish resulting in low friction losses.

·     Motor windings shall be vacuum impregnated with synthetic varnish for better moisture resistance.

·     Superior mechanical shaft seal for longer life and effective sealing against water leakage.

·     The electric rotor is pressure die cast & uses electric grade aluminium.

·     Grease Lubricated anti-friction ball bearings shall be fitted at both ends to withstand radial and axial loads.

·     They are precisely machined on modern machine tools to give you years of reliable operation.

·     Better insulating materials are used so that pumpset can with stand high temperature rise.

Variety & Range

●        Flow Range : up to 1035 LPM

●        Head Range : up to 42 metres

●        Rating : 0.37 to 2.2 kW

●        Rated Speed : 2900 RPM

Applications :

• Agriculture
• Industrial
• Commercial

Centrifugal Monoblock Pump - MDH

Features :

·     The laminations are non-oriented silicon steel & confirms to IS-648.

·     Volute, Impeller, Adaptor, Stator body, End shield shall be made of close-grained cast iron of high tensile strength and has a very smooth surface finish resulting in low friction losses.

·     Motor windings shall be vacuum impregnated with synthetic varnish for better moisture resistance.

·     Superior mechanical shaft seal for longer life and effective sealing against water leakage.

·     The electric rotor is pressure die cast & uses electric grade aluminium.

·     Grease Lubricated anti-friction ball bearings shall be fitted at both ends to withstand radial and axial loads.

·     They are precisely machined on modern machine tools to give you years of reliable operation.

·     Better insulating materials are used so that pumpset can with stand high temperature rise.

Variety & Range

●        Flow Range : up to 1035 LPM

●        Head Range : up to 42 metres

●        Rating : 0.37 to 2.2 kW

●        Rated Speed : 2900 RPM

Applications :

• Agriculture
• Industrial
• Commercial

Centrifugal Monoblock Pump - MDH

Features :

·     The laminations are non-oriented silicon steel & confirms to IS-648.

·     Volute, Impeller, Adaptor, Stator body, End shield shall be made of close-grained cast iron of high tensile strength and has a very smooth surface finish resulting in low friction losses.

·     Motor windings shall be vacuum impregnated with synthetic varnish for better moisture resistance.

·     Superior mechanical shaft seal for longer life and effective sealing against water leakage.

·     The electric rotor is pressure die cast & uses electric grade aluminium.

·     Grease Lubricated anti-friction ball bearings shall be fitted at both ends to withstand radial and axial loads.

·     They are precisely machined on modern machine tools to give you years of reliable operation.

·     Better insulating materials are used so that pumpset can with stand high temperature rise.

Variety & Range

●        Flow Range : up to 1035 LPM

●        Head Range : up to 42 metres

●        Rating : 0.37 to 2.2 kW

●        Rated Speed : 2900 RPM

Applications :

• Agriculture
• Industrial
• Commercial

Centrifugal Monoblock Pump - MDH

Features :

·     The laminations are non-oriented silicon steel & confirms to IS-648.

·     Volute, Impeller, Adaptor, Stator body, End shield shall be made of close-grained cast iron of high tensile strength and has a very smooth surface finish resulting in low friction losses.

·     Motor windings shall be vacuum impregnated with synthetic varnish for better moisture resistance.

·     Superior mechanical shaft seal for longer life and effective sealing against water leakage.

·     The electric rotor is pressure die cast & uses electric grade aluminium.

·     Grease Lubricated anti-friction ball bearings shall be fitted at both ends to withstand radial and axial loads.

·     They are precisely machined on modern machine tools to give you years of reliable operation.

·     Better insulating materials are used so that pumpset can with stand high temperature rise.

Variety & Range

●        Flow Range : up to 1035 LPM

●        Head Range : up to 42 metres

●        Rating : 0.37 to 2.2 kW

●        Rated Speed : 2900 RPM

Applications :

• Agriculture
• Industrial
• Commercial

Centrifugal Monoblock Pump - MDH

Features :

·     The laminations are non-oriented silicon steel & confirms to IS-648.

·     Volute, Impeller, Adaptor, Stator body, End shield shall be made of close-grained cast iron of high tensile strength and has a very smooth surface finish resulting in low friction losses.

·     Motor windings shall be vacuum impregnated with synthetic varnish for better moisture resistance.

·     Superior mechanical shaft seal for longer life and effective sealing against water leakage.

·     The electric rotor is pressure die cast & uses electric grade aluminium.

·     Grease Lubricated anti-friction ball bearings shall be fitted at both ends to withstand radial and axial loads.

·     They are precisely machined on modern machine tools to give you years of reliable operation.

·     Better insulating materials are used so that pumpset can with stand high temperature rise.

Variety & Range

●        Flow Range : up to 1035 LPM

●        Head Range : up to 42 metres

●        Rating : 0.37 to 2.2 kW

●        Rated Speed : 2900 RPM

Applications :

• Agriculture
• Industrial
• Commercial

Centrifugal Monoblock Pump - MDH

Features :

·     The laminations are non-oriented silicon steel & confirms to IS-648.

·     Volute, Impeller, Adaptor, Stator body, End shield shall be made of close-grained cast iron of high tensile strength and has a very smooth surface finish resulting in low friction losses.

·     Motor windings shall be vacuum impregnated with synthetic varnish for better moisture resistance.

·     Superior mechanical shaft seal for longer life and effective sealing against water leakage.

·     The electric rotor is pressure die cast & uses electric grade aluminium.

·     Grease Lubricated anti-friction ball bearings shall be fitted at both ends to withstand radial and axial loads.

·     They are precisely machined on modern machine tools to give you years of reliable operation.

·     Better insulating materials are used so that pumpset can with stand high temperature rise.

Variety & Range

●        Flow Range : up to 1035 LPM

●        Head Range : up to 42 metres

●        Rating : 0.37 to 2.2 kW

●        Rated Speed : 2900 RPM

Applications :

• Agriculture
• Industrial
• Commercial

Centrifugal Monoblock Pump - MDH

Features :

·     The laminations are non-oriented silicon steel & confirms to IS-648.

·     Volute, Impeller, Adaptor, Stator body, End shield shall be made of close-grained cast iron of high tensile strength and has a very smooth surface finish resulting in low friction losses.

·     Motor windings shall be vacuum impregnated with synthetic varnish for better moisture resistance.

·     Superior mechanical shaft seal for longer life and effective sealing against water leakage.

·     The electric rotor is pressure die cast & uses electric grade aluminium.

·     Grease Lubricated anti-friction ball bearings shall be fitted at both ends to withstand radial and axial loads.

·     They are precisely machined on modern machine tools to give you years of reliable operation.

·     Better insulating materials are used so that pumpset can with stand high temperature rise.

Variety & Range

●        Flow Range : up to 1035 LPM

●        Head Range : up to 42 metres

●        Rating : 0.37 to 2.2 kW

●        Rated Speed : 2900 RPM

Applications :

• Agriculture
• Industrial
• Commercial

Centrifugal Monoblock Pump - MDH

Features :

·     The laminations are non-oriented silicon steel & confirms to IS-648.

·     Volute, Impeller, Adaptor, Stator body, End shield shall be made of close-grained cast iron of high tensile strength and has a very smooth surface finish resulting in low friction losses.

·     Motor windings shall be vacuum impregnated with synthetic varnish for better moisture resistance.

·     Superior mechanical shaft seal for longer life and effective sealing against water leakage.

·     The electric rotor is pressure die cast & uses electric grade aluminium.

·     Grease Lubricated anti-friction ball bearings shall be fitted at both ends to withstand radial and axial loads.

·     They are precisely machined on modern machine tools to give you years of reliable operation.

·     Better insulating materials are used so that pumpset can with stand high temperature rise.

Variety & Range

●        Flow Range : up to 1035 LPM

●        Head Range : up to 42 metres

●        Rating : 0.37 to 2.2 kW

●        Rated Speed : 2900 RPM

Applications :

• Agriculture
• Industrial
• Commercial

Centrifugal Monoblock Pump - MDH

Features :

·     The laminations are non-oriented silicon steel & confirms to IS-648.

·     Volute, Impeller, Adaptor, Stator body, End shield shall be made of close-grained cast iron of high tensile strength and has a very smooth surface finish resulting in low friction losses.

·     Motor windings shall be vacuum impregnated with synthetic varnish for better moisture resistance.

·     Superior mechanical shaft seal for longer life and effective sealing against water leakage.

·     The electric rotor is pressure die cast & uses electric grade aluminium.

·     Grease Lubricated anti-friction ball bearings shall be fitted at both ends to withstand radial and axial loads.

·     They are precisely machined on modern machine tools to give you years of reliable operation.

·     Better insulating materials are used so that pumpset can with stand high temperature rise.

Variety & Range

●        Flow Range : up to 1035 LPM

●        Head Range : up to 42 metres

●        Rating : 0.37 to 2.2 kW

●        Rated Speed : 2900 RPM

Applications :

• Agriculture
• Industrial
• Commercial

Centrifugal Monoblock Pump - MDH

Features :

·     The laminations are non-oriented silicon steel & confirms to IS-648.

·     Volute, Impeller, Adaptor, Stator body, End shield shall be made of close-grained cast iron of high tensile strength and has a very smooth surface finish resulting in low friction losses.

·     Motor windings shall be vacuum impregnated with synthetic varnish for better moisture resistance.

·     Superior mechanical shaft seal for longer life and effective sealing against water leakage.

·     The electric rotor is pressure die cast & uses electric grade aluminium.

·     Grease Lubricated anti-friction ball bearings shall be fitted at both ends to withstand radial and axial loads.

·     They are precisely machined on modern machine tools to give you years of reliable operation.

·     Better insulating materials are used so that pumpset can with stand high temperature rise.

Variety & Range

●        Flow Range : up to 1035 LPM

●        Head Range : up to 42 metres

●        Rating : 0.37 to 2.2 kW

●        Rated Speed : 2900 RPM

Applications :

• Agriculture
• Industrial
• Commercial

Centrifugal Monoblock Pump - MDH

Features :

·     The laminations are non-oriented silicon steel & confirms to IS-648.

·     Volute, Impeller, Adaptor, Stator body, End shield shall be made of close-grained cast iron of high tensile strength and has a very smooth surface finish resulting in low friction losses.

·     Motor windings shall be vacuum impregnated with synthetic varnish for better moisture resistance.

·     Superior mechanical shaft seal for longer life and effective sealing against water leakage.

·     The electric rotor is pressure die cast & uses electric grade aluminium.

·     Grease Lubricated anti-friction ball bearings shall be fitted at both ends to withstand radial and axial loads.

·     They are precisely machined on modern machine tools to give you years of reliable operation.

·     Better insulating materials are used so that pumpset can with stand high temperature rise.

Variety & Range

●        Flow Range : up to 1035 LPM

●        Head Range : up to 42 metres

●        Rating : 0.37 to 2.2 kW

●        Rated Speed : 2900 RPM

Applications :

• Agriculture
• Industrial
• Commercial

Centrifugal Monoblock Pump - MDH

Features :

·     The laminations are non-oriented silicon steel & confirms to IS-648.

·     Volute, Impeller, Adaptor, Stator body, End shield shall be made of close-grained cast iron of high tensile strength and has a very smooth surface finish resulting in low friction losses.

·     Motor windings shall be vacuum impregnated with synthetic varnish for better moisture resistance.

·     Superior mechanical shaft seal for longer life and effective sealing against water leakage.

·     The electric rotor is pressure die cast & uses electric grade aluminium.

·     Grease Lubricated anti-friction ball bearings shall be fitted at both ends to withstand radial and axial loads.

·     They are precisely machined on modern machine tools to give you years of reliable operation.

·     Better insulating materials are used so that pumpset can with stand high temperature rise.

Variety & Range

●        Flow Range : up to 1035 LPM

●        Head Range : up to 42 metres

●        Rating : 0.37 to 2.2 kW

●        Rated Speed : 2900 RPM

Applications :

• Agriculture
• Industrial
• Commercial

Centrifugal Monoblock Pump - MDH

Features :

·     The laminations are non-oriented silicon steel & confirms to IS-648.

·     Volute, Impeller, Adaptor, Stator body, End shield shall be made of close-grained cast iron of high tensile strength and has a very smooth surface finish resulting in low friction losses.

·     Motor windings shall be vacuum impregnated with synthetic varnish for better moisture resistance.

·     Superior mechanical shaft seal for longer life and effective sealing against water leakage.

·     The electric rotor is pressure die cast & uses electric grade aluminium.

·     Grease Lubricated anti-friction ball bearings shall be fitted at both ends to withstand radial and axial loads.

·     They are precisely machined on modern machine tools to give you years of reliable operation.

·     Better insulating materials are used so that pumpset can with stand high temperature rise.

Variety & Range

●        Flow Range : up to 1035 LPM

●        Head Range : up to 42 metres

●        Rating : 0.37 to 2.2 kW

●        Rated Speed : 2900 RPM

Applications :

• Agriculture
• Industrial
• Commercial

Centrifugal Monoblock Pump - MDH

Features :

·     The laminations are non-oriented silicon steel & confirms to IS-648.

·     Volute, Impeller, Adaptor, Stator body, End shield shall be made of close-grained cast iron of high tensile strength and has a very smooth surface finish resulting in low friction losses.

·     Motor windings shall be vacuum impregnated with synthetic varnish for better moisture resistance.

·     Superior mechanical shaft seal for longer life and effective sealing against water leakage.

·     The electric rotor is pressure die cast & uses electric grade aluminium.

·     Grease Lubricated anti-friction ball bearings shall be fitted at both ends to withstand radial and axial loads.

·     They are precisely machined on modern machine tools to give you years of reliable operation.

·     Better insulating materials are used so that pumpset can with stand high temperature rise.

Variety & Range

●        Flow Range : up to 1035 LPM

●        Head Range : up to 42 metres

●        Rating : 0.37 to 2.2 kW

●        Rated Speed : 2900 RPM

Applications :

• Agriculture
• Industrial
• Commercial

Centrifugal Monoblock Pump - MDH

Features :

·     The laminations are non-oriented silicon steel & confirms to IS-648.

·     Volute, Impeller, Adaptor, Stator body, End shield shall be made of close-grained cast iron of high tensile strength and has a very smooth surface finish resulting in low friction losses.

·     Motor windings shall be vacuum impregnated with synthetic varnish for better moisture resistance.

·     Superior mechanical shaft seal for longer life and effective sealing against water leakage.

·     The electric rotor is pressure die cast & uses electric grade aluminium.

·     Grease Lubricated anti-friction ball bearings shall be fitted at both ends to withstand radial and axial loads.

·     They are precisely machined on modern machine tools to give you years of reliable operation.

·     Better insulating materials are used so that pumpset can with stand high temperature rise.

Variety & Range

●        Flow Range : up to 1035 LPM

●        Head Range : up to 42 metres

●        Rating : 0.37 to 2.2 kW

●        Rated Speed : 2900 RPM

Applications :

• Agriculture
• Industrial
• Commercial

Centrifugal Monoblock Pump - MDH

Features :

·     The laminations are non-oriented silicon steel & confirms to IS-648.

·     Volute, Impeller, Adaptor, Stator body, End shield shall be made of close-grained cast iron of high tensile strength and has a very smooth surface finish resulting in low friction losses.

·     Motor windings shall be vacuum impregnated with synthetic varnish for better moisture resistance.

·     Superior mechanical shaft seal for longer life and effective sealing against water leakage.

·     The electric rotor is pressure die cast & uses electric grade aluminium.

·     Grease Lubricated anti-friction ball bearings shall be fitted at both ends to withstand radial and axial loads.

·     They are precisely machined on modern machine tools to give you years of reliable operation.

·     Better insulating materials are used so that pumpset can with stand high temperature rise.

Variety & Range

●        Flow Range : up to 1035 LPM

●        Head Range : up to 42 metres

●        Rating : 0.37 to 2.2 kW

●        Rated Speed : 2900 RPM

Applications :

• Agriculture
• Industrial
• Commercial

Centrifugal Monoblock Pump - MDH

Features :

·     The laminations are non-oriented silicon steel & confirms to IS-648.

·     Volute, Impeller, Adaptor, Stator body, End shield shall be made of close-grained cast iron of high tensile strength and has a very smooth surface finish resulting in low friction losses.

·     Motor windings shall be vacuum impregnated with synthetic varnish for better moisture resistance.

·     Superior mechanical shaft seal for longer life and effective sealing against water leakage.

·     The electric rotor is pressure die cast & uses electric grade aluminium.

·     Grease Lubricated anti-friction ball bearings shall be fitted at both ends to withstand radial and axial loads.

·     They are precisely machined on modern machine tools to give you years of reliable operation.

·     Better insulating materials are used so that pumpset can with stand high temperature rise.

Variety & Range

●        Flow Range : up to 1035 LPM

●        Head Range : up to 42 metres

●        Rating : 0.37 to 2.2 kW

●        Rated Speed : 2900 RPM

Applications :

• Agriculture
• Industrial
• Commercial

Centrifugal Monoblock Pump - MDH

Features :

·     The laminations are non-oriented silicon steel & confirms to IS-648.

·     Volute, Impeller, Adaptor, Stator body, End shield shall be made of close-grained cast iron of high tensile strength and has a very smooth surface finish resulting in low friction losses.

·     Motor windings shall be vacuum impregnated with synthetic varnish for better moisture resistance.

·     Superior mechanical shaft seal for longer life and effective sealing against water leakage.

·     The electric rotor is pressure die cast & uses electric grade aluminium.

·     Grease Lubricated anti-friction ball bearings shall be fitted at both ends to withstand radial and axial loads.

·     They are precisely machined on modern machine tools to give you years of reliable operation.

·     Better insulating materials are used so that pumpset can with stand high temperature rise.

Variety & Range

●        Flow Range : up to 1035 LPM

●        Head Range : up to 42 metres

●        Rating : 0.37 to 2.2 kW

●        Rated Speed : 2900 RPM

Applications :

• Agriculture
• Industrial
• Commercial

Centrifugal Monoblock Pump - MDH

Features :

·     The laminations are non-oriented silicon steel & confirms to IS-648.

·     Volute, Impeller, Adaptor, Stator body, End shield shall be made of close-grained cast iron of high tensile strength and has a very smooth surface finish resulting in low friction losses.

·     Motor windings shall be vacuum impregnated with synthetic varnish for better moisture resistance.

·     Superior mechanical shaft seal for longer life and effective sealing against water leakage.

·     The electric rotor is pressure die cast & uses electric grade aluminium.

·     Grease Lubricated anti-friction ball bearings shall be fitted at both ends to withstand radial and axial loads.

·     They are precisely machined on modern machine tools to give you years of reliable operation.

·     Better insulating materials are used so that pumpset can with stand high temperature rise.

Variety & Range

●        Flow Range : up to 1035 LPM

●        Head Range : up to 42 metres

●        Rating : 0.37 to 2.2 kW

●        Rated Speed : 2900 RPM

Applications :

• Agriculture
• Industrial
• Commercial

Centrifugal Monoblock Pump - MDH

Features :

·     The laminations are non-oriented silicon steel & confirms to IS-648.

·     Volute, Impeller, Adaptor, Stator body, End shield shall be made of close-grained cast iron of high tensile strength and has a very smooth surface finish resulting in low friction losses.

·     Motor windings shall be vacuum impregnated with synthetic varnish for better moisture resistance.

·     Superior mechanical shaft seal for longer life and effective sealing against water leakage.

·     The electric rotor is pressure die cast & uses electric grade aluminium.

·     Grease Lubricated anti-friction ball bearings shall be fitted at both ends to withstand radial and axial loads.

·     They are precisely machined on modern machine tools to give you years of reliable operation.

·     Better insulating materials are used so that pumpset can with stand high temperature rise.

Variety & Range

●        Flow Range : up to 1035 LPM

●        Head Range : up to 42 metres

●        Rating : 0.37 to 2.2 kW

●        Rated Speed : 2900 RPM

Applications :

• Agriculture
• Industrial
• Commercial

Centrifugal Monoblock Pump - MDH

Features :

·     The laminations are non-oriented silicon steel & confirms to IS-648.

·     Volute, Impeller, Adaptor, Stator body, End shield shall be made of close-grained cast iron of high tensile strength and has a very smooth surface finish resulting in low friction losses.

·     Motor windings shall be vacuum impregnated with synthetic varnish for better moisture resistance.

·     Superior mechanical shaft seal for longer life and effective sealing against water leakage.

·     The electric rotor is pressure die cast & uses electric grade aluminium.

·     Grease Lubricated anti-friction ball bearings shall be fitted at both ends to withstand radial and axial loads.

·     They are precisely machined on modern machine tools to give you years of reliable operation.

·     Better insulating materials are used so that pumpset can with stand high temperature rise.

Variety & Range

●        Flow Range : up to 1035 LPM

●        Head Range : up to 42 metres

●        Rating : 0.37 to 2.2 kW

●        Rated Speed : 2900 RPM

Applications :

• Agriculture
• Industrial
• Commercial

Centrifugal Monoblock Pump - MDH

Features :

·     The laminations are non-oriented silicon steel & confirms to IS-648.

·     Volute, Impeller, Adaptor, Stator body, End shield shall be made of close-grained cast iron of high tensile strength and has a very smooth surface finish resulting in low friction losses.

·     Motor windings shall be vacuum impregnated with synthetic varnish for better moisture resistance.

·     Superior mechanical shaft seal for longer life and effective sealing against water leakage.

·     The electric rotor is pressure die cast & uses electric grade aluminium.

·     Grease Lubricated anti-friction ball bearings shall be fitted at both ends to withstand radial and axial loads.

·     They are precisely machined on modern machine tools to give you years of reliable operation.

·     Better insulating materials are used so that pumpset can with stand high temperature rise.

Variety & Range

●        Flow Range : up to 1035 LPM

●        Head Range : up to 42 metres

●        Rating : 0.37 to 2.2 kW

●        Rated Speed : 2900 RPM

Applications :

• Agriculture
• Industrial
• Commercial

Centrifugal Monoblock Pump - MDH

Features :

·     The laminations are non-oriented silicon steel & confirms to IS-648.

·     Volute, Impeller, Adaptor, Stator body, End shield shall be made of close-grained cast iron of high tensile strength and has a very smooth surface finish resulting in low friction losses.

·     Motor windings shall be vacuum impregnated with synthetic varnish for better moisture resistance.

·     Superior mechanical shaft seal for longer life and effective sealing against water leakage.

·     The electric rotor is pressure die cast & uses electric grade aluminium.

·     Grease Lubricated anti-friction ball bearings shall be fitted at both ends to withstand radial and axial loads.

·     They are precisely machined on modern machine tools to give you years of reliable operation.

·     Better insulating materials are used so that pumpset can with stand high temperature rise.

Variety & Range

●        Flow Range : up to 1035 LPM

●        Head Range : up to 42 metres

●        Rating : 0.37 to 2.2 kW

●        Rated Speed : 2900 RPM

Applications :

• Agriculture
• Industrial
• Commercial

Centrifugal Monoblock Pump - MDH