Shree Ram Pump & Pipe

Centrifugal Monoblock Pump - LBL

·  "LUBI" 1440 RPM Monoblock pumping sets are specially manufactured to meet the requirement of Agriculture. The Impellers and volute chambers are designed for a wide range of total heads.

·  "LUBI" Electric Motors, which are incorporated with the Monoblock are designed in "A" Class insulation and are suitable for large variations in line voltage. High silicon Steel laminations, Polyester Base Super enamelled Copper Wires and selected high grade Insulating material of best quality use into the making of these Motors. The Diecast rotors are dynamically balanced, which ensures long bearing life and prevents Vibration, for multiple purpose fan end shaft is extended and fitted with flat pulley.

• Monoblock are designed to withstand voltage drops to 320 volts.

• All Monoblock windings are vacuum impregnated with synthetic varnish for better moisture resistance.

Material of Construction :

Pump Casing : It is made of close grained cast iron of high tensile strength and has a very smooth surface finish for low friction losses.

Impeller : It is enclosed and is made of close grained cast iron with a very smooth surface finish for high efficiency.

Stuffing Box : It is water lubricated and is sufficiently deep. It is Packed with graphite Packings. (For LBH & LBL Series)

Mechanical Seal : Superior Mechanical Shaft Seal for longer life & effective sealing against water leakage. (For LBI Series)

Flanges : Companion Flanges are provided for connecting the suction and delivery pipes.

Stator Frame : It is made of close grained cast iron and has adequate numbers of cooling fins to keep the stator temperature rise within limits.

Stator : Vacuum Impregnated with polyester base copper wire and insulation.

Rotor : Rotor is aluminium die-casted. Rotor shaft is made of carbon steel and is of adequate size to transmit power to the impeller. It is provided with a replaceable bronze shaft sleeve to protect the shaft from wear.

Fan : It is made of Cast Iron and is designed to give a good air flow over the stator frame.

Bearings : They are grease lubricated and of ample size to withstand radial and axial thrust loads.

Terminal Box : It is of ample size to facilitate easy wiring.

Applications :

• Irrigation of Fields / Farms
• Housing complexes
• Community water supply
• Fire Fighting system
• Industries

Centrifugal Monoblock Pump - LBL

·  "LUBI" 1440 RPM Monoblock pumping sets are specially manufactured to meet the requirement of Agriculture. The Impellers and volute chambers are designed for a wide range of total heads.

·  "LUBI" Electric Motors, which are incorporated with the Monoblock are designed in "A" Class insulation and are suitable for large variations in line voltage. High silicon Steel laminations, Polyester Base Super enamelled Copper Wires and selected high grade Insulating material of best quality use into the making of these Motors. The Diecast rotors are dynamically balanced, which ensures long bearing life and prevents Vibration, for multiple purpose fan end shaft is extended and fitted with flat pulley.

• Monoblock are designed to withstand voltage drops to 320 volts.

• All Monoblock windings are vacuum impregnated with synthetic varnish for better moisture resistance.

Material of Construction :

Pump Casing : It is made of close grained cast iron of high tensile strength and has a very smooth surface finish for low friction losses.

Impeller : It is enclosed and is made of close grained cast iron with a very smooth surface finish for high efficiency.

Stuffing Box : It is water lubricated and is sufficiently deep. It is Packed with graphite Packings. (For LBH & LBL Series)

Mechanical Seal : Superior Mechanical Shaft Seal for longer life & effective sealing against water leakage. (For LBI Series)

Flanges : Companion Flanges are provided for connecting the suction and delivery pipes.

Stator Frame : It is made of close grained cast iron and has adequate numbers of cooling fins to keep the stator temperature rise within limits.

Stator : Vacuum Impregnated with polyester base copper wire and insulation.

Rotor : Rotor is aluminium die-casted. Rotor shaft is made of carbon steel and is of adequate size to transmit power to the impeller. It is provided with a replaceable bronze shaft sleeve to protect the shaft from wear.

Fan : It is made of Cast Iron and is designed to give a good air flow over the stator frame.

Bearings : They are grease lubricated and of ample size to withstand radial and axial thrust loads.

Terminal Box : It is of ample size to facilitate easy wiring.

Applications :

• Irrigation of Fields / Farms
• Housing complexes
• Community water supply
• Fire Fighting system
• Industries

Centrifugal Monoblock Pump - LBL

·  "LUBI" 1440 RPM Monoblock pumping sets are specially manufactured to meet the requirement of Agriculture. The Impellers and volute chambers are designed for a wide range of total heads.

·  "LUBI" Electric Motors, which are incorporated with the Monoblock are designed in "A" Class insulation and are suitable for large variations in line voltage. High silicon Steel laminations, Polyester Base Super enamelled Copper Wires and selected high grade Insulating material of best quality use into the making of these Motors. The Diecast rotors are dynamically balanced, which ensures long bearing life and prevents Vibration, for multiple purpose fan end shaft is extended and fitted with flat pulley.

• Monoblock are designed to withstand voltage drops to 320 volts.

• All Monoblock windings are vacuum impregnated with synthetic varnish for better moisture resistance.

Material of Construction :

Pump Casing : It is made of close grained cast iron of high tensile strength and has a very smooth surface finish for low friction losses.

Impeller : It is enclosed and is made of close grained cast iron with a very smooth surface finish for high efficiency.

Stuffing Box : It is water lubricated and is sufficiently deep. It is Packed with graphite Packings. (For LBH & LBL Series)

Mechanical Seal : Superior Mechanical Shaft Seal for longer life & effective sealing against water leakage. (For LBI Series)

Flanges : Companion Flanges are provided for connecting the suction and delivery pipes.

Stator Frame : It is made of close grained cast iron and has adequate numbers of cooling fins to keep the stator temperature rise within limits.

Stator : Vacuum Impregnated with polyester base copper wire and insulation.

Rotor : Rotor is aluminium die-casted. Rotor shaft is made of carbon steel and is of adequate size to transmit power to the impeller. It is provided with a replaceable bronze shaft sleeve to protect the shaft from wear.

Fan : It is made of Cast Iron and is designed to give a good air flow over the stator frame.

Bearings : They are grease lubricated and of ample size to withstand radial and axial thrust loads.

Terminal Box : It is of ample size to facilitate easy wiring.

Applications :

• Irrigation of Fields / Farms
• Housing complexes
• Community water supply
• Fire Fighting system
• Industries

Centrifugal Monoblock Pump - LBL

·  "LUBI" 1440 RPM Monoblock pumping sets are specially manufactured to meet the requirement of Agriculture. The Impellers and volute chambers are designed for a wide range of total heads.

·  "LUBI" Electric Motors, which are incorporated with the Monoblock are designed in "A" Class insulation and are suitable for large variations in line voltage. High silicon Steel laminations, Polyester Base Super enamelled Copper Wires and selected high grade Insulating material of best quality use into the making of these Motors. The Diecast rotors are dynamically balanced, which ensures long bearing life and prevents Vibration, for multiple purpose fan end shaft is extended and fitted with flat pulley.

• Monoblock are designed to withstand voltage drops to 320 volts.

• All Monoblock windings are vacuum impregnated with synthetic varnish for better moisture resistance.

Material of Construction :

Pump Casing : It is made of close grained cast iron of high tensile strength and has a very smooth surface finish for low friction losses.

Impeller : It is enclosed and is made of close grained cast iron with a very smooth surface finish for high efficiency.

Stuffing Box : It is water lubricated and is sufficiently deep. It is Packed with graphite Packings. (For LBH & LBL Series)

Mechanical Seal : Superior Mechanical Shaft Seal for longer life & effective sealing against water leakage. (For LBI Series)

Flanges : Companion Flanges are provided for connecting the suction and delivery pipes.

Stator Frame : It is made of close grained cast iron and has adequate numbers of cooling fins to keep the stator temperature rise within limits.

Stator : Vacuum Impregnated with polyester base copper wire and insulation.

Rotor : Rotor is aluminium die-casted. Rotor shaft is made of carbon steel and is of adequate size to transmit power to the impeller. It is provided with a replaceable bronze shaft sleeve to protect the shaft from wear.

Fan : It is made of Cast Iron and is designed to give a good air flow over the stator frame.

Bearings : They are grease lubricated and of ample size to withstand radial and axial thrust loads.

Terminal Box : It is of ample size to facilitate easy wiring.

Applications :

• Irrigation of Fields / Farms
• Housing complexes
• Community water supply
• Fire Fighting system
• Industries

Centrifugal Monoblock Pump - LBL

·  "LUBI" 1440 RPM Monoblock pumping sets are specially manufactured to meet the requirement of Agriculture. The Impellers and volute chambers are designed for a wide range of total heads.

·  "LUBI" Electric Motors, which are incorporated with the Monoblock are designed in "A" Class insulation and are suitable for large variations in line voltage. High silicon Steel laminations, Polyester Base Super enamelled Copper Wires and selected high grade Insulating material of best quality use into the making of these Motors. The Diecast rotors are dynamically balanced, which ensures long bearing life and prevents Vibration, for multiple purpose fan end shaft is extended and fitted with flat pulley.

• Monoblock are designed to withstand voltage drops to 320 volts.

• All Monoblock windings are vacuum impregnated with synthetic varnish for better moisture resistance.

Material of Construction :

Pump Casing : It is made of close grained cast iron of high tensile strength and has a very smooth surface finish for low friction losses.

Impeller : It is enclosed and is made of close grained cast iron with a very smooth surface finish for high efficiency.

Stuffing Box : It is water lubricated and is sufficiently deep. It is Packed with graphite Packings. (For LBH & LBL Series)

Mechanical Seal : Superior Mechanical Shaft Seal for longer life & effective sealing against water leakage. (For LBI Series)

Flanges : Companion Flanges are provided for connecting the suction and delivery pipes.

Stator Frame : It is made of close grained cast iron and has adequate numbers of cooling fins to keep the stator temperature rise within limits.

Stator : Vacuum Impregnated with polyester base copper wire and insulation.

Rotor : Rotor is aluminium die-casted. Rotor shaft is made of carbon steel and is of adequate size to transmit power to the impeller. It is provided with a replaceable bronze shaft sleeve to protect the shaft from wear.

Fan : It is made of Cast Iron and is designed to give a good air flow over the stator frame.

Bearings : They are grease lubricated and of ample size to withstand radial and axial thrust loads.

Terminal Box : It is of ample size to facilitate easy wiring.

Applications :

• Irrigation of Fields / Farms
• Housing complexes
• Community water supply
• Fire Fighting system
• Industries

Centrifugal Monoblock Pump - LBL

·  "LUBI" 1440 RPM Monoblock pumping sets are specially manufactured to meet the requirement of Agriculture. The Impellers and volute chambers are designed for a wide range of total heads.

·  "LUBI" Electric Motors, which are incorporated with the Monoblock are designed in "A" Class insulation and are suitable for large variations in line voltage. High silicon Steel laminations, Polyester Base Super enamelled Copper Wires and selected high grade Insulating material of best quality use into the making of these Motors. The Diecast rotors are dynamically balanced, which ensures long bearing life and prevents Vibration, for multiple purpose fan end shaft is extended and fitted with flat pulley.

• Monoblock are designed to withstand voltage drops to 320 volts.

• All Monoblock windings are vacuum impregnated with synthetic varnish for better moisture resistance.

Material of Construction :

Pump Casing : It is made of close grained cast iron of high tensile strength and has a very smooth surface finish for low friction losses.

Impeller : It is enclosed and is made of close grained cast iron with a very smooth surface finish for high efficiency.

Stuffing Box : It is water lubricated and is sufficiently deep. It is Packed with graphite Packings. (For LBH & LBL Series)

Mechanical Seal : Superior Mechanical Shaft Seal for longer life & effective sealing against water leakage. (For LBI Series)

Flanges : Companion Flanges are provided for connecting the suction and delivery pipes.

Stator Frame : It is made of close grained cast iron and has adequate numbers of cooling fins to keep the stator temperature rise within limits.

Stator : Vacuum Impregnated with polyester base copper wire and insulation.

Rotor : Rotor is aluminium die-casted. Rotor shaft is made of carbon steel and is of adequate size to transmit power to the impeller. It is provided with a replaceable bronze shaft sleeve to protect the shaft from wear.

Fan : It is made of Cast Iron and is designed to give a good air flow over the stator frame.

Bearings : They are grease lubricated and of ample size to withstand radial and axial thrust loads.

Terminal Box : It is of ample size to facilitate easy wiring.

Applications :

• Irrigation of Fields / Farms
• Housing complexes
• Community water supply
• Fire Fighting system
• Industries

Centrifugal Monoblock Pump - LBL

·  "LUBI" 1440 RPM Monoblock pumping sets are specially manufactured to meet the requirement of Agriculture. The Impellers and volute chambers are designed for a wide range of total heads.

·  "LUBI" Electric Motors, which are incorporated with the Monoblock are designed in "A" Class insulation and are suitable for large variations in line voltage. High silicon Steel laminations, Polyester Base Super enamelled Copper Wires and selected high grade Insulating material of best quality use into the making of these Motors. The Diecast rotors are dynamically balanced, which ensures long bearing life and prevents Vibration, for multiple purpose fan end shaft is extended and fitted with flat pulley.

• Monoblock are designed to withstand voltage drops to 320 volts.

• All Monoblock windings are vacuum impregnated with synthetic varnish for better moisture resistance.

Material of Construction :

Pump Casing : It is made of close grained cast iron of high tensile strength and has a very smooth surface finish for low friction losses.

Impeller : It is enclosed and is made of close grained cast iron with a very smooth surface finish for high efficiency.

Stuffing Box : It is water lubricated and is sufficiently deep. It is Packed with graphite Packings. (For LBH & LBL Series)

Mechanical Seal : Superior Mechanical Shaft Seal for longer life & effective sealing against water leakage. (For LBI Series)

Flanges : Companion Flanges are provided for connecting the suction and delivery pipes.

Stator Frame : It is made of close grained cast iron and has adequate numbers of cooling fins to keep the stator temperature rise within limits.

Stator : Vacuum Impregnated with polyester base copper wire and insulation.

Rotor : Rotor is aluminium die-casted. Rotor shaft is made of carbon steel and is of adequate size to transmit power to the impeller. It is provided with a replaceable bronze shaft sleeve to protect the shaft from wear.

Fan : It is made of Cast Iron and is designed to give a good air flow over the stator frame.

Bearings : They are grease lubricated and of ample size to withstand radial and axial thrust loads.

Terminal Box : It is of ample size to facilitate easy wiring.

Applications :

• Irrigation of Fields / Farms
• Housing complexes
• Community water supply
• Fire Fighting system
• Industries

Centrifugal Monoblock Pump - LBL

·  "LUBI" 1440 RPM Monoblock pumping sets are specially manufactured to meet the requirement of Agriculture. The Impellers and volute chambers are designed for a wide range of total heads.

·  "LUBI" Electric Motors, which are incorporated with the Monoblock are designed in "A" Class insulation and are suitable for large variations in line voltage. High silicon Steel laminations, Polyester Base Super enamelled Copper Wires and selected high grade Insulating material of best quality use into the making of these Motors. The Diecast rotors are dynamically balanced, which ensures long bearing life and prevents Vibration, for multiple purpose fan end shaft is extended and fitted with flat pulley.

• Monoblock are designed to withstand voltage drops to 320 volts.

• All Monoblock windings are vacuum impregnated with synthetic varnish for better moisture resistance.

Material of Construction :

Pump Casing : It is made of close grained cast iron of high tensile strength and has a very smooth surface finish for low friction losses.

Impeller : It is enclosed and is made of close grained cast iron with a very smooth surface finish for high efficiency.

Stuffing Box : It is water lubricated and is sufficiently deep. It is Packed with graphite Packings. (For LBH & LBL Series)

Mechanical Seal : Superior Mechanical Shaft Seal for longer life & effective sealing against water leakage. (For LBI Series)

Flanges : Companion Flanges are provided for connecting the suction and delivery pipes.

Stator Frame : It is made of close grained cast iron and has adequate numbers of cooling fins to keep the stator temperature rise within limits.

Stator : Vacuum Impregnated with polyester base copper wire and insulation.

Rotor : Rotor is aluminium die-casted. Rotor shaft is made of carbon steel and is of adequate size to transmit power to the impeller. It is provided with a replaceable bronze shaft sleeve to protect the shaft from wear.

Fan : It is made of Cast Iron and is designed to give a good air flow over the stator frame.

Bearings : They are grease lubricated and of ample size to withstand radial and axial thrust loads.

Terminal Box : It is of ample size to facilitate easy wiring.

Applications :

• Irrigation of Fields / Farms
• Housing complexes
• Community water supply
• Fire Fighting system
• Industries

Centrifugal Monoblock Pump - LBL

·  "LUBI" 1440 RPM Monoblock pumping sets are specially manufactured to meet the requirement of Agriculture. The Impellers and volute chambers are designed for a wide range of total heads.

·  "LUBI" Electric Motors, which are incorporated with the Monoblock are designed in "A" Class insulation and are suitable for large variations in line voltage. High silicon Steel laminations, Polyester Base Super enamelled Copper Wires and selected high grade Insulating material of best quality use into the making of these Motors. The Diecast rotors are dynamically balanced, which ensures long bearing life and prevents Vibration, for multiple purpose fan end shaft is extended and fitted with flat pulley.

• Monoblock are designed to withstand voltage drops to 320 volts.

• All Monoblock windings are vacuum impregnated with synthetic varnish for better moisture resistance.

Material of Construction :

Pump Casing : It is made of close grained cast iron of high tensile strength and has a very smooth surface finish for low friction losses.

Impeller : It is enclosed and is made of close grained cast iron with a very smooth surface finish for high efficiency.

Stuffing Box : It is water lubricated and is sufficiently deep. It is Packed with graphite Packings. (For LBH & LBL Series)

Mechanical Seal : Superior Mechanical Shaft Seal for longer life & effective sealing against water leakage. (For LBI Series)

Flanges : Companion Flanges are provided for connecting the suction and delivery pipes.

Stator Frame : It is made of close grained cast iron and has adequate numbers of cooling fins to keep the stator temperature rise within limits.

Stator : Vacuum Impregnated with polyester base copper wire and insulation.

Rotor : Rotor is aluminium die-casted. Rotor shaft is made of carbon steel and is of adequate size to transmit power to the impeller. It is provided with a replaceable bronze shaft sleeve to protect the shaft from wear.

Fan : It is made of Cast Iron and is designed to give a good air flow over the stator frame.

Bearings : They are grease lubricated and of ample size to withstand radial and axial thrust loads.

Terminal Box : It is of ample size to facilitate easy wiring.

Applications :

• Irrigation of Fields / Farms
• Housing complexes
• Community water supply
• Fire Fighting system
• Industries

Centrifugal Monoblock Pump - LBL

·  "LUBI" 1440 RPM Monoblock pumping sets are specially manufactured to meet the requirement of Agriculture. The Impellers and volute chambers are designed for a wide range of total heads.

·  "LUBI" Electric Motors, which are incorporated with the Monoblock are designed in "A" Class insulation and are suitable for large variations in line voltage. High silicon Steel laminations, Polyester Base Super enamelled Copper Wires and selected high grade Insulating material of best quality use into the making of these Motors. The Diecast rotors are dynamically balanced, which ensures long bearing life and prevents Vibration, for multiple purpose fan end shaft is extended and fitted with flat pulley.

• Monoblock are designed to withstand voltage drops to 320 volts.

• All Monoblock windings are vacuum impregnated with synthetic varnish for better moisture resistance.

Material of Construction :

Pump Casing : It is made of close grained cast iron of high tensile strength and has a very smooth surface finish for low friction losses.

Impeller : It is enclosed and is made of close grained cast iron with a very smooth surface finish for high efficiency.

Stuffing Box : It is water lubricated and is sufficiently deep. It is Packed with graphite Packings. (For LBH & LBL Series)

Mechanical Seal : Superior Mechanical Shaft Seal for longer life & effective sealing against water leakage. (For LBI Series)

Flanges : Companion Flanges are provided for connecting the suction and delivery pipes.

Stator Frame : It is made of close grained cast iron and has adequate numbers of cooling fins to keep the stator temperature rise within limits.

Stator : Vacuum Impregnated with polyester base copper wire and insulation.

Rotor : Rotor is aluminium die-casted. Rotor shaft is made of carbon steel and is of adequate size to transmit power to the impeller. It is provided with a replaceable bronze shaft sleeve to protect the shaft from wear.

Fan : It is made of Cast Iron and is designed to give a good air flow over the stator frame.

Bearings : They are grease lubricated and of ample size to withstand radial and axial thrust loads.

Terminal Box : It is of ample size to facilitate easy wiring.

Applications :

• Irrigation of Fields / Farms
• Housing complexes
• Community water supply
• Fire Fighting system
• Industries

Centrifugal Monoblock Pump - LBL

·  "LUBI" 1440 RPM Monoblock pumping sets are specially manufactured to meet the requirement of Agriculture. The Impellers and volute chambers are designed for a wide range of total heads.

·  "LUBI" Electric Motors, which are incorporated with the Monoblock are designed in "A" Class insulation and are suitable for large variations in line voltage. High silicon Steel laminations, Polyester Base Super enamelled Copper Wires and selected high grade Insulating material of best quality use into the making of these Motors. The Diecast rotors are dynamically balanced, which ensures long bearing life and prevents Vibration, for multiple purpose fan end shaft is extended and fitted with flat pulley.

• Monoblock are designed to withstand voltage drops to 320 volts.

• All Monoblock windings are vacuum impregnated with synthetic varnish for better moisture resistance.

Material of Construction :

Pump Casing : It is made of close grained cast iron of high tensile strength and has a very smooth surface finish for low friction losses.

Impeller : It is enclosed and is made of close grained cast iron with a very smooth surface finish for high efficiency.

Stuffing Box : It is water lubricated and is sufficiently deep. It is Packed with graphite Packings. (For LBH & LBL Series)

Mechanical Seal : Superior Mechanical Shaft Seal for longer life & effective sealing against water leakage. (For LBI Series)

Flanges : Companion Flanges are provided for connecting the suction and delivery pipes.

Stator Frame : It is made of close grained cast iron and has adequate numbers of cooling fins to keep the stator temperature rise within limits.

Stator : Vacuum Impregnated with polyester base copper wire and insulation.

Rotor : Rotor is aluminium die-casted. Rotor shaft is made of carbon steel and is of adequate size to transmit power to the impeller. It is provided with a replaceable bronze shaft sleeve to protect the shaft from wear.

Fan : It is made of Cast Iron and is designed to give a good air flow over the stator frame.

Bearings : They are grease lubricated and of ample size to withstand radial and axial thrust loads.

Terminal Box : It is of ample size to facilitate easy wiring.

Applications :

• Irrigation of Fields / Farms
• Housing complexes
• Community water supply
• Fire Fighting system
• Industries

Centrifugal Monoblock Pump - LBL

·  "LUBI" 1440 RPM Monoblock pumping sets are specially manufactured to meet the requirement of Agriculture. The Impellers and volute chambers are designed for a wide range of total heads.

·  "LUBI" Electric Motors, which are incorporated with the Monoblock are designed in "A" Class insulation and are suitable for large variations in line voltage. High silicon Steel laminations, Polyester Base Super enamelled Copper Wires and selected high grade Insulating material of best quality use into the making of these Motors. The Diecast rotors are dynamically balanced, which ensures long bearing life and prevents Vibration, for multiple purpose fan end shaft is extended and fitted with flat pulley.

• Monoblock are designed to withstand voltage drops to 320 volts.

• All Monoblock windings are vacuum impregnated with synthetic varnish for better moisture resistance.

Material of Construction :

Pump Casing : It is made of close grained cast iron of high tensile strength and has a very smooth surface finish for low friction losses.

Impeller : It is enclosed and is made of close grained cast iron with a very smooth surface finish for high efficiency.

Stuffing Box : It is water lubricated and is sufficiently deep. It is Packed with graphite Packings. (For LBH & LBL Series)

Mechanical Seal : Superior Mechanical Shaft Seal for longer life & effective sealing against water leakage. (For LBI Series)

Flanges : Companion Flanges are provided for connecting the suction and delivery pipes.

Stator Frame : It is made of close grained cast iron and has adequate numbers of cooling fins to keep the stator temperature rise within limits.

Stator : Vacuum Impregnated with polyester base copper wire and insulation.

Rotor : Rotor is aluminium die-casted. Rotor shaft is made of carbon steel and is of adequate size to transmit power to the impeller. It is provided with a replaceable bronze shaft sleeve to protect the shaft from wear.

Fan : It is made of Cast Iron and is designed to give a good air flow over the stator frame.

Bearings : They are grease lubricated and of ample size to withstand radial and axial thrust loads.

Terminal Box : It is of ample size to facilitate easy wiring.

Applications :

• Irrigation of Fields / Farms
• Housing complexes
• Community water supply
• Fire Fighting system
• Industries

Centrifugal Monoblock Pump - LBL

·  "LUBI" 1440 RPM Monoblock pumping sets are specially manufactured to meet the requirement of Agriculture. The Impellers and volute chambers are designed for a wide range of total heads.

·  "LUBI" Electric Motors, which are incorporated with the Monoblock are designed in "A" Class insulation and are suitable for large variations in line voltage. High silicon Steel laminations, Polyester Base Super enamelled Copper Wires and selected high grade Insulating material of best quality use into the making of these Motors. The Diecast rotors are dynamically balanced, which ensures long bearing life and prevents Vibration, for multiple purpose fan end shaft is extended and fitted with flat pulley.

• Monoblock are designed to withstand voltage drops to 320 volts.

• All Monoblock windings are vacuum impregnated with synthetic varnish for better moisture resistance.

Material of Construction :

Pump Casing : It is made of close grained cast iron of high tensile strength and has a very smooth surface finish for low friction losses.

Impeller : It is enclosed and is made of close grained cast iron with a very smooth surface finish for high efficiency.

Stuffing Box : It is water lubricated and is sufficiently deep. It is Packed with graphite Packings. (For LBH & LBL Series)

Mechanical Seal : Superior Mechanical Shaft Seal for longer life & effective sealing against water leakage. (For LBI Series)

Flanges : Companion Flanges are provided for connecting the suction and delivery pipes.

Stator Frame : It is made of close grained cast iron and has adequate numbers of cooling fins to keep the stator temperature rise within limits.

Stator : Vacuum Impregnated with polyester base copper wire and insulation.

Rotor : Rotor is aluminium die-casted. Rotor shaft is made of carbon steel and is of adequate size to transmit power to the impeller. It is provided with a replaceable bronze shaft sleeve to protect the shaft from wear.

Fan : It is made of Cast Iron and is designed to give a good air flow over the stator frame.

Bearings : They are grease lubricated and of ample size to withstand radial and axial thrust loads.

Terminal Box : It is of ample size to facilitate easy wiring.

Applications :

• Irrigation of Fields / Farms
• Housing complexes
• Community water supply
• Fire Fighting system
• Industries

Centrifugal Monoblock Pump - LBL

·  "LUBI" 1440 RPM Monoblock pumping sets are specially manufactured to meet the requirement of Agriculture. The Impellers and volute chambers are designed for a wide range of total heads.

·  "LUBI" Electric Motors, which are incorporated with the Monoblock are designed in "A" Class insulation and are suitable for large variations in line voltage. High silicon Steel laminations, Polyester Base Super enamelled Copper Wires and selected high grade Insulating material of best quality use into the making of these Motors. The Diecast rotors are dynamically balanced, which ensures long bearing life and prevents Vibration, for multiple purpose fan end shaft is extended and fitted with flat pulley.

• Monoblock are designed to withstand voltage drops to 320 volts.

• All Monoblock windings are vacuum impregnated with synthetic varnish for better moisture resistance.

Material of Construction :

Pump Casing : It is made of close grained cast iron of high tensile strength and has a very smooth surface finish for low friction losses.

Impeller : It is enclosed and is made of close grained cast iron with a very smooth surface finish for high efficiency.

Stuffing Box : It is water lubricated and is sufficiently deep. It is Packed with graphite Packings. (For LBH & LBL Series)

Mechanical Seal : Superior Mechanical Shaft Seal for longer life & effective sealing against water leakage. (For LBI Series)

Flanges : Companion Flanges are provided for connecting the suction and delivery pipes.

Stator Frame : It is made of close grained cast iron and has adequate numbers of cooling fins to keep the stator temperature rise within limits.

Stator : Vacuum Impregnated with polyester base copper wire and insulation.

Rotor : Rotor is aluminium die-casted. Rotor shaft is made of carbon steel and is of adequate size to transmit power to the impeller. It is provided with a replaceable bronze shaft sleeve to protect the shaft from wear.

Fan : It is made of Cast Iron and is designed to give a good air flow over the stator frame.

Bearings : They are grease lubricated and of ample size to withstand radial and axial thrust loads.

Terminal Box : It is of ample size to facilitate easy wiring.

Applications :

• Irrigation of Fields / Farms
• Housing complexes
• Community water supply
• Fire Fighting system
• Industries

Centrifugal Monoblock Pump - LBL

·  "LUBI" 1440 RPM Monoblock pumping sets are specially manufactured to meet the requirement of Agriculture. The Impellers and volute chambers are designed for a wide range of total heads.

·  "LUBI" Electric Motors, which are incorporated with the Monoblock are designed in "A" Class insulation and are suitable for large variations in line voltage. High silicon Steel laminations, Polyester Base Super enamelled Copper Wires and selected high grade Insulating material of best quality use into the making of these Motors. The Diecast rotors are dynamically balanced, which ensures long bearing life and prevents Vibration, for multiple purpose fan end shaft is extended and fitted with flat pulley.

• Monoblock are designed to withstand voltage drops to 320 volts.

• All Monoblock windings are vacuum impregnated with synthetic varnish for better moisture resistance.

Material of Construction :

Pump Casing : It is made of close grained cast iron of high tensile strength and has a very smooth surface finish for low friction losses.

Impeller : It is enclosed and is made of close grained cast iron with a very smooth surface finish for high efficiency.

Stuffing Box : It is water lubricated and is sufficiently deep. It is Packed with graphite Packings. (For LBH & LBL Series)

Mechanical Seal : Superior Mechanical Shaft Seal for longer life & effective sealing against water leakage. (For LBI Series)

Flanges : Companion Flanges are provided for connecting the suction and delivery pipes.

Stator Frame : It is made of close grained cast iron and has adequate numbers of cooling fins to keep the stator temperature rise within limits.

Stator : Vacuum Impregnated with polyester base copper wire and insulation.

Rotor : Rotor is aluminium die-casted. Rotor shaft is made of carbon steel and is of adequate size to transmit power to the impeller. It is provided with a replaceable bronze shaft sleeve to protect the shaft from wear.

Fan : It is made of Cast Iron and is designed to give a good air flow over the stator frame.

Bearings : They are grease lubricated and of ample size to withstand radial and axial thrust loads.

Terminal Box : It is of ample size to facilitate easy wiring.

Applications :

• Irrigation of Fields / Farms
• Housing complexes
• Community water supply
• Fire Fighting system
• Industries

Centrifugal Monoblock Pump - LBL

·  "LUBI" 1440 RPM Monoblock pumping sets are specially manufactured to meet the requirement of Agriculture. The Impellers and volute chambers are designed for a wide range of total heads.

·  "LUBI" Electric Motors, which are incorporated with the Monoblock are designed in "A" Class insulation and are suitable for large variations in line voltage. High silicon Steel laminations, Polyester Base Super enamelled Copper Wires and selected high grade Insulating material of best quality use into the making of these Motors. The Diecast rotors are dynamically balanced, which ensures long bearing life and prevents Vibration, for multiple purpose fan end shaft is extended and fitted with flat pulley.

• Monoblock are designed to withstand voltage drops to 320 volts.

• All Monoblock windings are vacuum impregnated with synthetic varnish for better moisture resistance.

Material of Construction :

Pump Casing : It is made of close grained cast iron of high tensile strength and has a very smooth surface finish for low friction losses.

Impeller : It is enclosed and is made of close grained cast iron with a very smooth surface finish for high efficiency.

Stuffing Box : It is water lubricated and is sufficiently deep. It is Packed with graphite Packings. (For LBH & LBL Series)

Mechanical Seal : Superior Mechanical Shaft Seal for longer life & effective sealing against water leakage. (For LBI Series)

Flanges : Companion Flanges are provided for connecting the suction and delivery pipes.

Stator Frame : It is made of close grained cast iron and has adequate numbers of cooling fins to keep the stator temperature rise within limits.

Stator : Vacuum Impregnated with polyester base copper wire and insulation.

Rotor : Rotor is aluminium die-casted. Rotor shaft is made of carbon steel and is of adequate size to transmit power to the impeller. It is provided with a replaceable bronze shaft sleeve to protect the shaft from wear.

Fan : It is made of Cast Iron and is designed to give a good air flow over the stator frame.

Bearings : They are grease lubricated and of ample size to withstand radial and axial thrust loads.

Terminal Box : It is of ample size to facilitate easy wiring.

Applications :

• Irrigation of Fields / Farms
• Housing complexes
• Community water supply
• Fire Fighting system
• Industries

Centrifugal Monoblock Pump - LBL

·  "LUBI" 1440 RPM Monoblock pumping sets are specially manufactured to meet the requirement of Agriculture. The Impellers and volute chambers are designed for a wide range of total heads.

·  "LUBI" Electric Motors, which are incorporated with the Monoblock are designed in "A" Class insulation and are suitable for large variations in line voltage. High silicon Steel laminations, Polyester Base Super enamelled Copper Wires and selected high grade Insulating material of best quality use into the making of these Motors. The Diecast rotors are dynamically balanced, which ensures long bearing life and prevents Vibration, for multiple purpose fan end shaft is extended and fitted with flat pulley.

• Monoblock are designed to withstand voltage drops to 320 volts.

• All Monoblock windings are vacuum impregnated with synthetic varnish for better moisture resistance.

Material of Construction :

Pump Casing : It is made of close grained cast iron of high tensile strength and has a very smooth surface finish for low friction losses.

Impeller : It is enclosed and is made of close grained cast iron with a very smooth surface finish for high efficiency.

Stuffing Box : It is water lubricated and is sufficiently deep. It is Packed with graphite Packings. (For LBH & LBL Series)

Mechanical Seal : Superior Mechanical Shaft Seal for longer life & effective sealing against water leakage. (For LBI Series)

Flanges : Companion Flanges are provided for connecting the suction and delivery pipes.

Stator Frame : It is made of close grained cast iron and has adequate numbers of cooling fins to keep the stator temperature rise within limits.

Stator : Vacuum Impregnated with polyester base copper wire and insulation.

Rotor : Rotor is aluminium die-casted. Rotor shaft is made of carbon steel and is of adequate size to transmit power to the impeller. It is provided with a replaceable bronze shaft sleeve to protect the shaft from wear.

Fan : It is made of Cast Iron and is designed to give a good air flow over the stator frame.

Bearings : They are grease lubricated and of ample size to withstand radial and axial thrust loads.

Terminal Box : It is of ample size to facilitate easy wiring.

Applications :

• Irrigation of Fields / Farms
• Housing complexes
• Community water supply
• Fire Fighting system
• Industries

Centrifugal Monoblock Pump - LBL

·  "LUBI" 1440 RPM Monoblock pumping sets are specially manufactured to meet the requirement of Agriculture. The Impellers and volute chambers are designed for a wide range of total heads.

·  "LUBI" Electric Motors, which are incorporated with the Monoblock are designed in "A" Class insulation and are suitable for large variations in line voltage. High silicon Steel laminations, Polyester Base Super enamelled Copper Wires and selected high grade Insulating material of best quality use into the making of these Motors. The Diecast rotors are dynamically balanced, which ensures long bearing life and prevents Vibration, for multiple purpose fan end shaft is extended and fitted with flat pulley.

• Monoblock are designed to withstand voltage drops to 320 volts.

• All Monoblock windings are vacuum impregnated with synthetic varnish for better moisture resistance.

Material of Construction :

Pump Casing : It is made of close grained cast iron of high tensile strength and has a very smooth surface finish for low friction losses.

Impeller : It is enclosed and is made of close grained cast iron with a very smooth surface finish for high efficiency.

Stuffing Box : It is water lubricated and is sufficiently deep. It is Packed with graphite Packings. (For LBH & LBL Series)

Mechanical Seal : Superior Mechanical Shaft Seal for longer life & effective sealing against water leakage. (For LBI Series)

Flanges : Companion Flanges are provided for connecting the suction and delivery pipes.

Stator Frame : It is made of close grained cast iron and has adequate numbers of cooling fins to keep the stator temperature rise within limits.

Stator : Vacuum Impregnated with polyester base copper wire and insulation.

Rotor : Rotor is aluminium die-casted. Rotor shaft is made of carbon steel and is of adequate size to transmit power to the impeller. It is provided with a replaceable bronze shaft sleeve to protect the shaft from wear.

Fan : It is made of Cast Iron and is designed to give a good air flow over the stator frame.

Bearings : They are grease lubricated and of ample size to withstand radial and axial thrust loads.

Terminal Box : It is of ample size to facilitate easy wiring.

Applications :

• Irrigation of Fields / Farms
• Housing complexes
• Community water supply
• Fire Fighting system
• Industries

Centrifugal Monoblock Pump - LBL

·  "LUBI" 1440 RPM Monoblock pumping sets are specially manufactured to meet the requirement of Agriculture. The Impellers and volute chambers are designed for a wide range of total heads.

·  "LUBI" Electric Motors, which are incorporated with the Monoblock are designed in "A" Class insulation and are suitable for large variations in line voltage. High silicon Steel laminations, Polyester Base Super enamelled Copper Wires and selected high grade Insulating material of best quality use into the making of these Motors. The Diecast rotors are dynamically balanced, which ensures long bearing life and prevents Vibration, for multiple purpose fan end shaft is extended and fitted with flat pulley.

• Monoblock are designed to withstand voltage drops to 320 volts.

• All Monoblock windings are vacuum impregnated with synthetic varnish for better moisture resistance.

Material of Construction :

Pump Casing : It is made of close grained cast iron of high tensile strength and has a very smooth surface finish for low friction losses.

Impeller : It is enclosed and is made of close grained cast iron with a very smooth surface finish for high efficiency.

Stuffing Box : It is water lubricated and is sufficiently deep. It is Packed with graphite Packings. (For LBH & LBL Series)

Mechanical Seal : Superior Mechanical Shaft Seal for longer life & effective sealing against water leakage. (For LBI Series)

Flanges : Companion Flanges are provided for connecting the suction and delivery pipes.

Stator Frame : It is made of close grained cast iron and has adequate numbers of cooling fins to keep the stator temperature rise within limits.

Stator : Vacuum Impregnated with polyester base copper wire and insulation.

Rotor : Rotor is aluminium die-casted. Rotor shaft is made of carbon steel and is of adequate size to transmit power to the impeller. It is provided with a replaceable bronze shaft sleeve to protect the shaft from wear.

Fan : It is made of Cast Iron and is designed to give a good air flow over the stator frame.

Bearings : They are grease lubricated and of ample size to withstand radial and axial thrust loads.

Terminal Box : It is of ample size to facilitate easy wiring.

Applications :

• Irrigation of Fields / Farms
• Housing complexes
• Community water supply
• Fire Fighting system
• Industries

Centrifugal Monoblock Pump - LBL

·  "LUBI" 1440 RPM Monoblock pumping sets are specially manufactured to meet the requirement of Agriculture. The Impellers and volute chambers are designed for a wide range of total heads.

·  "LUBI" Electric Motors, which are incorporated with the Monoblock are designed in "A" Class insulation and are suitable for large variations in line voltage. High silicon Steel laminations, Polyester Base Super enamelled Copper Wires and selected high grade Insulating material of best quality use into the making of these Motors. The Diecast rotors are dynamically balanced, which ensures long bearing life and prevents Vibration, for multiple purpose fan end shaft is extended and fitted with flat pulley.

• Monoblock are designed to withstand voltage drops to 320 volts.

• All Monoblock windings are vacuum impregnated with synthetic varnish for better moisture resistance.

Material of Construction :

Pump Casing : It is made of close grained cast iron of high tensile strength and has a very smooth surface finish for low friction losses.

Impeller : It is enclosed and is made of close grained cast iron with a very smooth surface finish for high efficiency.

Stuffing Box : It is water lubricated and is sufficiently deep. It is Packed with graphite Packings. (For LBH & LBL Series)

Mechanical Seal : Superior Mechanical Shaft Seal for longer life & effective sealing against water leakage. (For LBI Series)

Flanges : Companion Flanges are provided for connecting the suction and delivery pipes.

Stator Frame : It is made of close grained cast iron and has adequate numbers of cooling fins to keep the stator temperature rise within limits.

Stator : Vacuum Impregnated with polyester base copper wire and insulation.

Rotor : Rotor is aluminium die-casted. Rotor shaft is made of carbon steel and is of adequate size to transmit power to the impeller. It is provided with a replaceable bronze shaft sleeve to protect the shaft from wear.

Fan : It is made of Cast Iron and is designed to give a good air flow over the stator frame.

Bearings : They are grease lubricated and of ample size to withstand radial and axial thrust loads.

Terminal Box : It is of ample size to facilitate easy wiring.

Applications :

• Irrigation of Fields / Farms
• Housing complexes
• Community water supply
• Fire Fighting system
• Industries

Centrifugal Monoblock Pump - LBL

·  "LUBI" 1440 RPM Monoblock pumping sets are specially manufactured to meet the requirement of Agriculture. The Impellers and volute chambers are designed for a wide range of total heads.

·  "LUBI" Electric Motors, which are incorporated with the Monoblock are designed in "A" Class insulation and are suitable for large variations in line voltage. High silicon Steel laminations, Polyester Base Super enamelled Copper Wires and selected high grade Insulating material of best quality use into the making of these Motors. The Diecast rotors are dynamically balanced, which ensures long bearing life and prevents Vibration, for multiple purpose fan end shaft is extended and fitted with flat pulley.

• Monoblock are designed to withstand voltage drops to 320 volts.

• All Monoblock windings are vacuum impregnated with synthetic varnish for better moisture resistance.

Material of Construction :

Pump Casing : It is made of close grained cast iron of high tensile strength and has a very smooth surface finish for low friction losses.

Impeller : It is enclosed and is made of close grained cast iron with a very smooth surface finish for high efficiency.

Stuffing Box : It is water lubricated and is sufficiently deep. It is Packed with graphite Packings. (For LBH & LBL Series)

Mechanical Seal : Superior Mechanical Shaft Seal for longer life & effective sealing against water leakage. (For LBI Series)

Flanges : Companion Flanges are provided for connecting the suction and delivery pipes.

Stator Frame : It is made of close grained cast iron and has adequate numbers of cooling fins to keep the stator temperature rise within limits.

Stator : Vacuum Impregnated with polyester base copper wire and insulation.

Rotor : Rotor is aluminium die-casted. Rotor shaft is made of carbon steel and is of adequate size to transmit power to the impeller. It is provided with a replaceable bronze shaft sleeve to protect the shaft from wear.

Fan : It is made of Cast Iron and is designed to give a good air flow over the stator frame.

Bearings : They are grease lubricated and of ample size to withstand radial and axial thrust loads.

Terminal Box : It is of ample size to facilitate easy wiring.

Applications :

• Irrigation of Fields / Farms
• Housing complexes
• Community water supply
• Fire Fighting system
• Industries

Centrifugal Monoblock Pump - LBL

·  "LUBI" 1440 RPM Monoblock pumping sets are specially manufactured to meet the requirement of Agriculture. The Impellers and volute chambers are designed for a wide range of total heads.

·  "LUBI" Electric Motors, which are incorporated with the Monoblock are designed in "A" Class insulation and are suitable for large variations in line voltage. High silicon Steel laminations, Polyester Base Super enamelled Copper Wires and selected high grade Insulating material of best quality use into the making of these Motors. The Diecast rotors are dynamically balanced, which ensures long bearing life and prevents Vibration, for multiple purpose fan end shaft is extended and fitted with flat pulley.

• Monoblock are designed to withstand voltage drops to 320 volts.

• All Monoblock windings are vacuum impregnated with synthetic varnish for better moisture resistance.

Material of Construction :

Pump Casing : It is made of close grained cast iron of high tensile strength and has a very smooth surface finish for low friction losses.

Impeller : It is enclosed and is made of close grained cast iron with a very smooth surface finish for high efficiency.

Stuffing Box : It is water lubricated and is sufficiently deep. It is Packed with graphite Packings. (For LBH & LBL Series)

Mechanical Seal : Superior Mechanical Shaft Seal for longer life & effective sealing against water leakage. (For LBI Series)

Flanges : Companion Flanges are provided for connecting the suction and delivery pipes.

Stator Frame : It is made of close grained cast iron and has adequate numbers of cooling fins to keep the stator temperature rise within limits.

Stator : Vacuum Impregnated with polyester base copper wire and insulation.

Rotor : Rotor is aluminium die-casted. Rotor shaft is made of carbon steel and is of adequate size to transmit power to the impeller. It is provided with a replaceable bronze shaft sleeve to protect the shaft from wear.

Fan : It is made of Cast Iron and is designed to give a good air flow over the stator frame.

Bearings : They are grease lubricated and of ample size to withstand radial and axial thrust loads.

Terminal Box : It is of ample size to facilitate easy wiring.

Applications :

• Irrigation of Fields / Farms
• Housing complexes
• Community water supply
• Fire Fighting system
• Industries

Centrifugal Monoblock Pump - LBL

·  "LUBI" 1440 RPM Monoblock pumping sets are specially manufactured to meet the requirement of Agriculture. The Impellers and volute chambers are designed for a wide range of total heads.

·  "LUBI" Electric Motors, which are incorporated with the Monoblock are designed in "A" Class insulation and are suitable for large variations in line voltage. High silicon Steel laminations, Polyester Base Super enamelled Copper Wires and selected high grade Insulating material of best quality use into the making of these Motors. The Diecast rotors are dynamically balanced, which ensures long bearing life and prevents Vibration, for multiple purpose fan end shaft is extended and fitted with flat pulley.

• Monoblock are designed to withstand voltage drops to 320 volts.

• All Monoblock windings are vacuum impregnated with synthetic varnish for better moisture resistance.

Material of Construction :

Pump Casing : It is made of close grained cast iron of high tensile strength and has a very smooth surface finish for low friction losses.

Impeller : It is enclosed and is made of close grained cast iron with a very smooth surface finish for high efficiency.

Stuffing Box : It is water lubricated and is sufficiently deep. It is Packed with graphite Packings. (For LBH & LBL Series)

Mechanical Seal : Superior Mechanical Shaft Seal for longer life & effective sealing against water leakage. (For LBI Series)

Flanges : Companion Flanges are provided for connecting the suction and delivery pipes.

Stator Frame : It is made of close grained cast iron and has adequate numbers of cooling fins to keep the stator temperature rise within limits.

Stator : Vacuum Impregnated with polyester base copper wire and insulation.

Rotor : Rotor is aluminium die-casted. Rotor shaft is made of carbon steel and is of adequate size to transmit power to the impeller. It is provided with a replaceable bronze shaft sleeve to protect the shaft from wear.

Fan : It is made of Cast Iron and is designed to give a good air flow over the stator frame.

Bearings : They are grease lubricated and of ample size to withstand radial and axial thrust loads.

Terminal Box : It is of ample size to facilitate easy wiring.

Applications :

• Irrigation of Fields / Farms
• Housing complexes
• Community water supply
• Fire Fighting system
• Industries

Centrifugal Monoblock Pump - LBL

·  "LUBI" 1440 RPM Monoblock pumping sets are specially manufactured to meet the requirement of Agriculture. The Impellers and volute chambers are designed for a wide range of total heads.

·  "LUBI" Electric Motors, which are incorporated with the Monoblock are designed in "A" Class insulation and are suitable for large variations in line voltage. High silicon Steel laminations, Polyester Base Super enamelled Copper Wires and selected high grade Insulating material of best quality use into the making of these Motors. The Diecast rotors are dynamically balanced, which ensures long bearing life and prevents Vibration, for multiple purpose fan end shaft is extended and fitted with flat pulley.

• Monoblock are designed to withstand voltage drops to 320 volts.

• All Monoblock windings are vacuum impregnated with synthetic varnish for better moisture resistance.

Material of Construction :

Pump Casing : It is made of close grained cast iron of high tensile strength and has a very smooth surface finish for low friction losses.

Impeller : It is enclosed and is made of close grained cast iron with a very smooth surface finish for high efficiency.

Stuffing Box : It is water lubricated and is sufficiently deep. It is Packed with graphite Packings. (For LBH & LBL Series)

Mechanical Seal : Superior Mechanical Shaft Seal for longer life & effective sealing against water leakage. (For LBI Series)

Flanges : Companion Flanges are provided for connecting the suction and delivery pipes.

Stator Frame : It is made of close grained cast iron and has adequate numbers of cooling fins to keep the stator temperature rise within limits.

Stator : Vacuum Impregnated with polyester base copper wire and insulation.

Rotor : Rotor is aluminium die-casted. Rotor shaft is made of carbon steel and is of adequate size to transmit power to the impeller. It is provided with a replaceable bronze shaft sleeve to protect the shaft from wear.

Fan : It is made of Cast Iron and is designed to give a good air flow over the stator frame.

Bearings : They are grease lubricated and of ample size to withstand radial and axial thrust loads.

Terminal Box : It is of ample size to facilitate easy wiring.

Applications :

• Irrigation of Fields / Farms
• Housing complexes
• Community water supply
• Fire Fighting system
• Industries

Centrifugal Monoblock Pump - LBL

·  "LUBI" 1440 RPM Monoblock pumping sets are specially manufactured to meet the requirement of Agriculture. The Impellers and volute chambers are designed for a wide range of total heads.

·  "LUBI" Electric Motors, which are incorporated with the Monoblock are designed in "A" Class insulation and are suitable for large variations in line voltage. High silicon Steel laminations, Polyester Base Super enamelled Copper Wires and selected high grade Insulating material of best quality use into the making of these Motors. The Diecast rotors are dynamically balanced, which ensures long bearing life and prevents Vibration, for multiple purpose fan end shaft is extended and fitted with flat pulley.

• Monoblock are designed to withstand voltage drops to 320 volts.

• All Monoblock windings are vacuum impregnated with synthetic varnish for better moisture resistance.

Material of Construction :

Pump Casing : It is made of close grained cast iron of high tensile strength and has a very smooth surface finish for low friction losses.

Impeller : It is enclosed and is made of close grained cast iron with a very smooth surface finish for high efficiency.

Stuffing Box : It is water lubricated and is sufficiently deep. It is Packed with graphite Packings. (For LBH & LBL Series)

Mechanical Seal : Superior Mechanical Shaft Seal for longer life & effective sealing against water leakage. (For LBI Series)

Flanges : Companion Flanges are provided for connecting the suction and delivery pipes.

Stator Frame : It is made of close grained cast iron and has adequate numbers of cooling fins to keep the stator temperature rise within limits.

Stator : Vacuum Impregnated with polyester base copper wire and insulation.

Rotor : Rotor is aluminium die-casted. Rotor shaft is made of carbon steel and is of adequate size to transmit power to the impeller. It is provided with a replaceable bronze shaft sleeve to protect the shaft from wear.

Fan : It is made of Cast Iron and is designed to give a good air flow over the stator frame.

Bearings : They are grease lubricated and of ample size to withstand radial and axial thrust loads.

Terminal Box : It is of ample size to facilitate easy wiring.

Applications :

• Irrigation of Fields / Farms
• Housing complexes
• Community water supply
• Fire Fighting system
• Industries

Centrifugal Monoblock Pump - LBL

·  "LUBI" 1440 RPM Monoblock pumping sets are specially manufactured to meet the requirement of Agriculture. The Impellers and volute chambers are designed for a wide range of total heads.

·  "LUBI" Electric Motors, which are incorporated with the Monoblock are designed in "A" Class insulation and are suitable for large variations in line voltage. High silicon Steel laminations, Polyester Base Super enamelled Copper Wires and selected high grade Insulating material of best quality use into the making of these Motors. The Diecast rotors are dynamically balanced, which ensures long bearing life and prevents Vibration, for multiple purpose fan end shaft is extended and fitted with flat pulley.

• Monoblock are designed to withstand voltage drops to 320 volts.

• All Monoblock windings are vacuum impregnated with synthetic varnish for better moisture resistance.

Material of Construction :

Pump Casing : It is made of close grained cast iron of high tensile strength and has a very smooth surface finish for low friction losses.

Impeller : It is enclosed and is made of close grained cast iron with a very smooth surface finish for high efficiency.

Stuffing Box : It is water lubricated and is sufficiently deep. It is Packed with graphite Packings. (For LBH & LBL Series)

Mechanical Seal : Superior Mechanical Shaft Seal for longer life & effective sealing against water leakage. (For LBI Series)

Flanges : Companion Flanges are provided for connecting the suction and delivery pipes.

Stator Frame : It is made of close grained cast iron and has adequate numbers of cooling fins to keep the stator temperature rise within limits.

Stator : Vacuum Impregnated with polyester base copper wire and insulation.

Rotor : Rotor is aluminium die-casted. Rotor shaft is made of carbon steel and is of adequate size to transmit power to the impeller. It is provided with a replaceable bronze shaft sleeve to protect the shaft from wear.

Fan : It is made of Cast Iron and is designed to give a good air flow over the stator frame.

Bearings : They are grease lubricated and of ample size to withstand radial and axial thrust loads.

Terminal Box : It is of ample size to facilitate easy wiring.

Applications :

• Irrigation of Fields / Farms
• Housing complexes
• Community water supply
• Fire Fighting system
• Industries

Centrifugal Monoblock Pump - LBL

·  "LUBI" 1440 RPM Monoblock pumping sets are specially manufactured to meet the requirement of Agriculture. The Impellers and volute chambers are designed for a wide range of total heads.

·  "LUBI" Electric Motors, which are incorporated with the Monoblock are designed in "A" Class insulation and are suitable for large variations in line voltage. High silicon Steel laminations, Polyester Base Super enamelled Copper Wires and selected high grade Insulating material of best quality use into the making of these Motors. The Diecast rotors are dynamically balanced, which ensures long bearing life and prevents Vibration, for multiple purpose fan end shaft is extended and fitted with flat pulley.

• Monoblock are designed to withstand voltage drops to 320 volts.

• All Monoblock windings are vacuum impregnated with synthetic varnish for better moisture resistance.

Material of Construction :

Pump Casing : It is made of close grained cast iron of high tensile strength and has a very smooth surface finish for low friction losses.

Impeller : It is enclosed and is made of close grained cast iron with a very smooth surface finish for high efficiency.

Stuffing Box : It is water lubricated and is sufficiently deep. It is Packed with graphite Packings. (For LBH & LBL Series)

Mechanical Seal : Superior Mechanical Shaft Seal for longer life & effective sealing against water leakage. (For LBI Series)

Flanges : Companion Flanges are provided for connecting the suction and delivery pipes.

Stator Frame : It is made of close grained cast iron and has adequate numbers of cooling fins to keep the stator temperature rise within limits.

Stator : Vacuum Impregnated with polyester base copper wire and insulation.

Rotor : Rotor is aluminium die-casted. Rotor shaft is made of carbon steel and is of adequate size to transmit power to the impeller. It is provided with a replaceable bronze shaft sleeve to protect the shaft from wear.

Fan : It is made of Cast Iron and is designed to give a good air flow over the stator frame.

Bearings : They are grease lubricated and of ample size to withstand radial and axial thrust loads.

Terminal Box : It is of ample size to facilitate easy wiring.

Applications :

• Irrigation of Fields / Farms
• Housing complexes
• Community water supply
• Fire Fighting system
• Industries

Centrifugal Monoblock Pump - LBL

·  "LUBI" 1440 RPM Monoblock pumping sets are specially manufactured to meet the requirement of Agriculture. The Impellers and volute chambers are designed for a wide range of total heads.

·  "LUBI" Electric Motors, which are incorporated with the Monoblock are designed in "A" Class insulation and are suitable for large variations in line voltage. High silicon Steel laminations, Polyester Base Super enamelled Copper Wires and selected high grade Insulating material of best quality use into the making of these Motors. The Diecast rotors are dynamically balanced, which ensures long bearing life and prevents Vibration, for multiple purpose fan end shaft is extended and fitted with flat pulley.

• Monoblock are designed to withstand voltage drops to 320 volts.

• All Monoblock windings are vacuum impregnated with synthetic varnish for better moisture resistance.

Material of Construction :

Pump Casing : It is made of close grained cast iron of high tensile strength and has a very smooth surface finish for low friction losses.

Impeller : It is enclosed and is made of close grained cast iron with a very smooth surface finish for high efficiency.

Stuffing Box : It is water lubricated and is sufficiently deep. It is Packed with graphite Packings. (For LBH & LBL Series)

Mechanical Seal : Superior Mechanical Shaft Seal for longer life & effective sealing against water leakage. (For LBI Series)

Flanges : Companion Flanges are provided for connecting the suction and delivery pipes.

Stator Frame : It is made of close grained cast iron and has adequate numbers of cooling fins to keep the stator temperature rise within limits.

Stator : Vacuum Impregnated with polyester base copper wire and insulation.

Rotor : Rotor is aluminium die-casted. Rotor shaft is made of carbon steel and is of adequate size to transmit power to the impeller. It is provided with a replaceable bronze shaft sleeve to protect the shaft from wear.

Fan : It is made of Cast Iron and is designed to give a good air flow over the stator frame.

Bearings : They are grease lubricated and of ample size to withstand radial and axial thrust loads.

Terminal Box : It is of ample size to facilitate easy wiring.

Applications :

• Irrigation of Fields / Farms
• Housing complexes
• Community water supply
• Fire Fighting system
• Industries

Centrifugal Monoblock Pump - LBL

·  "LUBI" 1440 RPM Monoblock pumping sets are specially manufactured to meet the requirement of Agriculture. The Impellers and volute chambers are designed for a wide range of total heads.

·  "LUBI" Electric Motors, which are incorporated with the Monoblock are designed in "A" Class insulation and are suitable for large variations in line voltage. High silicon Steel laminations, Polyester Base Super enamelled Copper Wires and selected high grade Insulating material of best quality use into the making of these Motors. The Diecast rotors are dynamically balanced, which ensures long bearing life and prevents Vibration, for multiple purpose fan end shaft is extended and fitted with flat pulley.

• Monoblock are designed to withstand voltage drops to 320 volts.

• All Monoblock windings are vacuum impregnated with synthetic varnish for better moisture resistance.

Material of Construction :

Pump Casing : It is made of close grained cast iron of high tensile strength and has a very smooth surface finish for low friction losses.

Impeller : It is enclosed and is made of close grained cast iron with a very smooth surface finish for high efficiency.

Stuffing Box : It is water lubricated and is sufficiently deep. It is Packed with graphite Packings. (For LBH & LBL Series)

Mechanical Seal : Superior Mechanical Shaft Seal for longer life & effective sealing against water leakage. (For LBI Series)

Flanges : Companion Flanges are provided for connecting the suction and delivery pipes.

Stator Frame : It is made of close grained cast iron and has adequate numbers of cooling fins to keep the stator temperature rise within limits.

Stator : Vacuum Impregnated with polyester base copper wire and insulation.

Rotor : Rotor is aluminium die-casted. Rotor shaft is made of carbon steel and is of adequate size to transmit power to the impeller. It is provided with a replaceable bronze shaft sleeve to protect the shaft from wear.

Fan : It is made of Cast Iron and is designed to give a good air flow over the stator frame.

Bearings : They are grease lubricated and of ample size to withstand radial and axial thrust loads.

Terminal Box : It is of ample size to facilitate easy wiring.

Applications :

• Irrigation of Fields / Farms
• Housing complexes
• Community water supply
• Fire Fighting system
• Industries