V9 BLU
Pioneers in the industry, we offer open well pump (blu v9 open well sub. pump - 3.00 hp - 3 phase, copper, ci body, low head), open well pump (blu v9 open well sub. pump - 6.50 hp - 3 phase, copper, ss body, high head), open well pump (blu v9 open well sub. pump - 6.50 hp - 3 phase, alu., ss body, high head), open well pump (blu v9 open well sub. pump - 3.00 hp - 3 phase, copper, ss body, low head), open well pump (blu v9 open well sub. pump - 3.00 hp - 3 phase, copper, ss body, high head) and open well pump (blu v9 open well sub. pump - 7.50 hp - 2 phase, copper, ss body, low head) from India.
Open Well Pump (BLU V9 Open Well Sub. Pump - 3.00 HP - 3 Phase, Copper, CI Body, Low Head)
Request Callback
₹ 17456 / Piece Get Latest Price
Product Brochure
| Country of Origin | Made in India |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | CI Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
| Power | 5 hp |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (BLU V9 Open Well Sub. Pump - 6.50 HP - 3 Phase, Copper, SS Body, High Head)
Request Callback
₹ 20446 / Piece Get Latest Price
Product Brochure
| Power | 5 hp |
| Country of Origin | Made in India |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | CI Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (BLU V9 Open Well Sub. Pump - 6.50 HP - 3 Phase, Alu., SS Body, High Head)
Request Callback
₹ 19276 / Piece Get Latest Price
Product Brochure
| Power | 5 hp |
| Country of Origin | Made in India |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | CI Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (BLU V9 Open Well Sub. Pump - 3.00 HP - 3 Phase, Copper, SS Body, Low Head)
Request Callback
₹ 19146 / Piece Get Latest Price
Product Brochure
| Country of Origin | Made in India |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | SS Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
| Power | 5 HP |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (BLU V9 Open Well Sub. Pump - 3.00 HP - 3 Phase, Copper, SS Body, High Head)
Request Callback
₹ 17326 / Piece Get Latest Price
Product Brochure
| Country of Origin | Made in India |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | CI Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
| Power | 5 hp |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (BLU V9 Open Well Sub. Pump - 7.50 HP - 2 Phase, Copper, SS Body, Low Head)
Request Callback
₹ 23956 / Piece Get Latest Price
Product Brochure
| Country of Origin | Made in India |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | CI Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
| Power | 3 hp |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (BLU V9 Open Well Sub. Pump - 5.00 HP - 2 Phase, Copper, SS Body, Low Head)
Request Callback
₹ 20901 / Piece Get Latest Price
Product Brochure
| Country of Origin | Made in India |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | SS Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
| Power | 3 HP |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (BLU V9 Open Well Sub. Pump - 5.00 HP - 3 Phase, Copper, CI Body, Low Head)
Request Callback
₹ 18691 / Piece Get Latest Price
Product Brochure
| Country of Origin | Made in India |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | CI Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
| Power | 3 hp |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (BLU V9 Open Well Sub. Pump - 6.50 HP - 3 Phase, Alu., CI Body, High Head)
Request Callback
₹ 20056 / Piece Get Latest Price
Product Brochure
| Power | 3 hp |
| Country of Origin | Made in India |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | CI Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (BLU V9 Open Well Sub. Pump - 7.50 HP - 3 Phase, Alu., CI Body, High Head)
Request Callback
₹ 22721 / Piece Get Latest Price
Product Brochure
| Power | 3 HP |
| Country of Origin | Made in India |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | SS Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (BLU V9 Open Well Sub. Pump - 6.50 HP - 3 Phase, Alu., CI Body, Low Head)
Request Callback
₹ 19601 / Piece Get Latest Price
Product Brochure
| Power | 5 HP |
| Country of Origin | Made in India |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | CI Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (BLU V9 Open Well Sub. Pump - 10.00 HP - 3 Phase, Copper, CI Body, Low Head)
Request Callback
₹ 31691 / Piece Get Latest Price
Product Brochure
| Power | 5 HP |
| Country of Origin | Made in India |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | SS Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (BLU V9 Open Well Sub. Pump - 7.50 HP - 3 Phase, Alu., CI Body, Low Head)
Request Callback
₹ 21616 / Piece Get Latest Price
Product Brochure
| Power | 3 hp |
| Country of Origin | Made in India |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | CI Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (BLU V9 Open Well Sub. Pump - 7.50 HP - 3 Phase, Alu., CI Body, Low Head)
Request Callback
₹ 22266 / Piece Get Latest Price
Product Brochure
| Power | 3 HP |
| Country of Origin | Made in India |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | SS Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (BLU V9 Open Well Sub. Pump - 3.00 HP - 3 Phase, Alu., CI Body, Low Head)
Request Callback
₹ 16481 / Piece Get Latest Price
Product Brochure
| Power | 5 HP |
| Discharge Range | 150 LPM |
| Discharge | 60-100 LPM |
| Number Of Stages | Multi Stage Pump |
| Motor Phase | Three Phase |
| Material | Mild Steel |
| Head | 100 m |
| Rated Volts And Frequency | Depends on |
| Working Condition for Head Range | Up To 6600 IPH |
| Bowl length | 15*15 To 25*25 mm |
| Country of Origin | Made in India |
| Stage | 4 |
Minimum order quantity: 10 Piece
- Products suitable for 150 mm (6.0") and above bore diameter.
- Radial Flow Pump design.
- Energy efficient Motor HP available from 3.00 HP to 30.0 HP.
- Head range Up to 400 Meters
- Motor Diameter 140 mm.
- Pump Diameter 135 mm.
- Wet type water filled design.
- Suitable for 3 Phase 440 V, 50 Hz AC power supply.
Materials of Construction :
- Stator Shell : Stainless Steel
- Motor Shaft : Stainless Steel
- Motor Stainer : Copper
- Motor Winding : Copper
- Thrust Bearing : Heavy duty thrust bearing
- Motor Bush : Bronze LTB-4
- All CI Parts : Graded Casting
- All Fasteners : Stainless Steel
- Pump Shell : Stainless Steel
- Pump Shaft : Stainless Steel
- Impeller : SS 304
- Diffuser : SS 410
- Pump Stainer : Stainless Steel
- All CI Parts : Graded Casting
- All Fasteners : Stainless Steel
Open Well Pump (BLU V9 Open Well Sub. Pump - 3.00 HP - 3 Phase, Alu., CI Body, High Head)
Request Callback
₹ 17001 / Piece Get Latest Price
Product Brochure
| Power | 7.5 HP |
| Number Of Stages | Multi Stage Pump |
| Motor Phase | Three Phase |
| Head | 50 m |
| Maximum Discharge Flow | 100 LPM |
| Type | Borewell |
| Rated Volts And Frequency | 415v / 50 Hz |
| Power Source | AC Powered |
| Warranty | 12 months |
| Voltage | 415v |
| Insulation | yes |
| Installation/After Sales Service | Yes |
| Country of Origin | Made in India |
| Stage | 12 |
Minimum order quantity: 10 Piece
- Products suitable for 150 mm (6.0") and above bore diameter.
- Radial Flow Pump design.
- Energy efficient Motor HP available from 3.00 HP to 30.0 HP.
- Head range Up to 400 Meters
- Motor Diameter 140 mm.
- Pump Diameter 135 mm.
- Wet type water filled design.
- Suitable for 3 Phase 440 V, 50 Hz AC power supply.
Materials of Construction :
- Stator Shell : Stainless Steel
- Motor Shaft : Stainless Steel
- Motor Stainer : Copper
- Motor Winding : Copper
- Thrust Bearing : Heavy duty thrust bearing
- Motor Bush : Bronze LTB-4
- All CI Parts : Graded Casting
- All Fasteners : Stainless Steel
- Pump Shell : Stainless Steel
- Pump Shaft : Stainless Steel
- Impeller : SS 304
- Diffuser : SS 410
- Pump Stainer : Stainless Steel
- All CI Parts : Graded Casting
- All Fasteners : Stainless Steel
Open Well Pump (BLU V9 Open Well Sub. Pump - 3.00 HP - 3 Phase, Copper, CI Body, High Head)
Request Callback
₹ 17976 / Piece Get Latest Price
Product Brochure
| Power | 17.5 HP |
| Country of Origin | Made in India |
| HP | 17.50 HP |
| Stage | 9 |
| Warranty | 12 months |
| Installation/After Sales Service | Yes |
Minimum order quantity: 10 Piece
- Products suitable for 150 mm (6.0") and above bore diameter.
- Radial Flow Pump design.
- Energy efficient Motor HP available from 3.00 HP to 30.0 HP.
- Head range Up to 400 Meters
- Motor Diameter 140 mm.
- Pump Diameter 135 mm.
- Wet type water filled design.
- Suitable for 3 Phase 440 V, 50 Hz AC power supply.
Materials of Construction :
- Stator Shell : Stainless Steel
- Motor Shaft : Stainless Steel
- Motor Stainer : Copper
- Motor Winding : Copper
- Thrust Bearing : Heavy duty thrust bearing
- Motor Bush : Bronze LTB-4
- All CI Parts : Graded Casting
- All Fasteners : Stainless Steel
- Pump Shell : Stainless Steel
- Pump Shaft : Stainless Steel
- Impeller : SS 304
- Diffuser : SS 410
- Pump Stainer : Stainless Steel
- All CI Parts : Graded Casting
- All Fasteners : Stainless Steel
Open Well Pump (BLU V9 Open Well Sub. Pump - 5.00 HP - 3 Phase, Copper, SS Body, High Head)
Request Callback
₹ 23046 / Piece Get Latest Price
Product Brochure
| Country of Origin | Made in India |
| Stage | 4 |
| Warranty | 12 months |
| Installation/After Sales Service | Yes |
| Power | 7.5 HP |
Minimum order quantity: 10 Piece
-
We offer superior quality of V-4 Submersible Pumps, which are cast from high grade stainless steel. These pumps are light and have a compact built. We use latest technology with innovative designs in manufacturing these pumps. The outstanding quality and unbeatable performance. We offer superior quality V-4 Submersible Pumps which are cast from high grade stainless steel. These pumps are light and have a compact built. We use the latest technology with innovative designs in manufacturing these pumps. The outstanding quality and unbeatable performance of our product has made it our clients' favourite choice. These pumps are easy to operate, consume less energy, maintenance free, and highly efficient and on top of these, we are offering these pumps at a very attractive price. our pumps have made these extensively popular. These pumps are easy to operate, consume less energy, maintenance free and highly efficient.
This pump set is examined in terms of quality in order to supply an excellent range. Offered pump set is developed using the finest quality components and sophisticated technology. Our entire range of pump set is highly acknowledged in the market for its high quality & consistent performance.
- Specially designed for 89 mm (4") and above bore Diameter
- Unique product to survive old borewell having corrosion/rusting.
- Pumps are available in Multistage, highly efficient Radial Flow design.
- Energy efficient Motor HP available from 0.50 HP to 7.5 HP.
- Head range up to 300 Meters.
- Motor Diameter 86 mm.
- Pump Diameter 86 mm.
- Wet type water filled design.
- Suitable for 1Phase 220 To 240 V, 400 To 440 Hz AC power supply with suitable control panel.
Application :
- Domestic and Industrial water lifting (Water Supply)
- Civil and Industrial
- Fire Fighting
- Irrigation
- Fountains
- Farm houses and irrigation of small fields
- Multi-Storeyed buildings
- Water circulation systems
- Nurseries and dairies
Open Well Pump (BLU V9 Open Well Sub. Pump - 5.00 HP - 3 Phase, Alu., SS Body, Low Head)
Request Callback
₹ 18821 / Piece Get Latest Price
Product Brochure
| Discharge Range | 60 LPM |
| Motor Phase | Single Phase |
| Voltage | 220V |
| Material | MS |
| Motor Speed | 2800 RPM |
| Operating Current | 5Amps |
| Type | Electric |
| Pump Model | V5 |
| Country of Origin | Made in India |
| Brand Name | Blue Label |
| NRV | 1x1 inch |
| Overall Efficiency | 50% |
| Category | B |
| Marketed By | Shree Ram Pump And Pipe |
| Max Head | 500 Foot |
| Power | 2 hp |
Minimum order quantity: 10 Piece
- Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (BLU V9 Open Well Sub. Pump - 10.00 HP - 3 Phase, Alu., CI Body, Low Head)
Request Callback
₹ 29871 / Piece Get Latest Price
Product Brochure
| Power | 17.5 HP |
| Country of Origin | Made in India |
| HP | 17.50 HP |
| Stage | 9 |
| Warranty | 12 months |
| Installation/After Sales Service | Yes |
Minimum order quantity: 10 Piece
- Products suitable for 150 mm (6.0") and above bore diameter.
- Radial Flow Pump design.
- Energy efficient Motor HP available from 3.00 HP to 30.0 HP.
- Head range Up to 400 Meters
- Motor Diameter 140 mm.
- Pump Diameter 135 mm.
- Wet type water filled design.
- Suitable for 3 Phase 440 V, 50 Hz AC power supply.
Materials of Construction :
- Stator Shell : Stainless Steel
- Motor Shaft : Stainless Steel
- Motor Stainer : Copper
- Motor Winding : Copper
- Thrust Bearing : Heavy duty thrust bearing
- Motor Bush : Bronze LTB-4
- All CI Parts : Graded Casting
- All Fasteners : Stainless Steel
- Pump Shell : Stainless Steel
- Pump Shaft : Stainless Steel
- Impeller : SS 304
- Diffuser : SS 410
- Pump Stainer : Stainless Steel
- All CI Parts : Graded Casting
- All Fasteners : Stainless Steel
Open Well Pump (BLU V9 Open Well Sub. Pump - 10.00 HP - 3 Phase, Alu., CI Body, Low Head)
Request Callback
₹ 27921 / Piece Get Latest Price
Product Brochure
| Power | 5 HP |
| Country of Origin | Made in India |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | SS Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (BLU V9 Open Well Sub. Pump - 3.00 HP - 3 Phase, Alu., SS Body, High Head)
Request Callback
₹ 16351 / Piece Get Latest Price
| Power | 10 HP |
| Discharge Range | 30 LPM |
| Type | Automatic |
| Material | Mild Steel |
| Maximum Discharge Flow | 100 LPM |
| Number Of Stages | Single-stage Pump |
| Motor Phase | Single Phase |
| Head | 15 m |
| Power Source | Pump Only |
| Warranty | 6 months |
| Voltage | 220 V |
| Frequency | 50 Hz |
| Country of Origin | Made in India |
| Stage | 16 |
Minimum order quantity: 10 Piece
- Products suitable for 150 mm (6.0") and above bore diameter.
- Radial Flow Pump design.
- Energy efficient Motor HP available from 3.00 HP to 30.0 HP.
- Head range Up to 400 Meters
- Motor Diameter 140 mm.
- Pump Diameter 135 mm.
- Wet type water filled design.
- Suitable for 3 Phase 440 V, 50 Hz AC power supply.
Materials of Construction :
- Stator Shell : Stainless Steel
- Motor Shaft : Stainless Steel
- Motor Stainer : Copper
- Motor Winding : Copper
- Thrust Bearing : Heavy duty thrust bearing
- Motor Bush : Bronze LTB-4
- All CI Parts : Graded Casting
- All Fasteners : Stainless Steel
- Pump Shell : Stainless Steel
- Pump Shaft : Stainless Steel
- Impeller : SS 304
- Diffuser : SS 410
- Pump Stainer : Stainless Steel
- All CI Parts : Graded Casting
- All Fasteners : Stainless Steel
Open Well Pump (BLU V9 Open Well Sub. Pump - 7.50 HP - 3 Phase, Copper, SS Body, Low Head)
Request Callback
₹ 23241 / Piece Get Latest Price
Product Brochure
| Power | 10 HP |
| Country of Origin | Made in India |
| HP | 10.00 HP |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | CI Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (BLU V9 Open Well Sub. Pump - 7.50 HP - 3 Phase, Alu., SS Body, Low Head)
Request Callback
₹ 21876 / Piece Get Latest Price
Product Brochure
| Power | 6.5 HP |
| Country of Origin | Made in India |
| HP | 6.50 HP |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | CI Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (BLU V9 Open Well Sub. Pump - 5.00 HP - 2 Phase, Copper, SS Body, High Head)
Request Callback
₹ 11801 / Piece Get Latest Price
Product Brochure
| Power | 6.5 HP |
| Country of Origin | Made in India |
| HP | 6.50 HP |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | CI Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (BLU V9 Open Well Sub. Pump - 7.50 HP - 3 Phase, Alu., SS Body, Low Head)
Request Callback
₹ 23306 / Piece Get Latest Price
Product Brochure
| Power | 10 HP |
| Country of Origin | Made in India |
| HP | 10.00 HP |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | SS Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (BLU V9 Open Well Sub. Pump - 5.00 HP - 3 Phase, Alu., SS Body, High Head)
Request Callback
₹ 21031 / Piece Get Latest Price
Product Brochure
| Country of Origin | Made in India |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | SS Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
| Power | 3 HP |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (BLU V9 Open Well Sub. Pump - 7.50 HP - 3 Phase, Copper, SS Body, High Head)
Request Callback
₹ 26101 / Piece Get Latest Price
Product Brochure
| Power | 7.5 HP |
| Country of Origin | Made in India |
| HP | 7.50 HP |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | CI Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (BLU V9 Open Well Sub. Pump - 6.50 HP - 3 Phase, Copper, SS Body, Low Head)
Request Callback
₹ 19991 / Piece Get Latest Price
Product Brochure
| Power | 5 HP |
| Country of Origin | Made in India |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | SS Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (BLU V9 Open Well Sub. Pump - 7.50 HP - 2 Phase, Alu., SS Body, High Head)
Request Callback
₹ 11931 / Piece Get Latest Price
Product Brochure
| Power | 7.5 hp |
| Country of Origin | Made in India |
| Application | Agriculture, Industrial |
| AgricultureMaterial | Copper |
| Body | CI Body |
| Dimension | 37 x 33 x 21 cm |
| Warranty | 12 months |
| Installation/After Sales Service | Yes |
| Pump Type | OPEN WELL |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (BLU V9 Open Well Sub. Pump - 7.50 HP - 2 Phase, Copper, SS Body, High Head)
Request Callback
₹ 13231 / Piece Get Latest Price
Product Brochure
| Power | 7.5 hp |
| Country of Origin | Made in India |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | CI Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (BLU V9 Open Well Sub. Pump - 10.00 HP - 3 Phase, Copper, SS Body, Low Head)
Request Callback
₹ 27466 / Piece Get Latest Price
Product Brochure
| Power | 10 HP |
| Country of Origin | Made in India |
| HP | 10.00 HP |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | CI Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (BLU V9 Open Well Sub. Pump - 7.50 HP - 3 Phase, Alu., SS Body, High Head)
Request Callback
₹ 23501 / Piece Get Latest Price
Product Brochure
| Power | 7.5 HP |
| Country of Origin | Made in India |
| HP | 7.50 HP |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | SS Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (BLU V9 Open Well Sub. Pump - 10.00 HP - 3 Phase, Copper, SS Body, Low Head)
Request Callback
₹ 30781 / Piece Get Latest Price
Product Brochure
| Power | 7.5 HP |
| Country of Origin | Made in India |
| HP | 7.50 HP |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | SS Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (BLU V9 Open Well Sub. Pump - 3.00 HP - 3 Phase, Alu., SS Body, Low Head)
Request Callback
₹ 17456 / Piece Get Latest Price
Product Brochure
| Power | 6.5 HP |
| Country of Origin | Made in India |
| HP | 6.50 HP |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | CI Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (BLU V9 Open Well Sub. Pump - 10.00 HP - 3 Phase, Alu., SS Body, Low Head)
Request Callback
₹ 28961 / Piece Get Latest Price
Product Brochure
| Power | 7.5 HP |
| Country of Origin | Made in India |
| HP | 7.50 HP |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | SS Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (BLU V9 Open Well Sub. Pump - 5.00 HP - 3 Phase, Copper, CI Body, High Head)
Request Callback
₹ 19146 / Piece Get Latest Price
Product Brochure
| Power | 5 HP |
| Country of Origin | Made in India |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | SS Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (BLU V9 Open Well Sub. Pump - 5.00 HP - 2 Phase, Alu., SS Body, Low Head)
Request Callback
₹ 18821 / Piece Get Latest Price
Product Brochure
| Country of Origin | Made in India |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | SS Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
| Power | 3 HP |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (BLU V9 Open Well Sub. Pump - 6.50 HP - 3 Phase, Copper, CI Body, High Head)
Request Callback
₹ 21291 / Piece Get Latest Price
Product Brochure
| Power | 7.5 hp |
| Country of Origin | Made in India |
| HP | 7.50 HP |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | CI Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (BLU V9 Open Well Sub. Pump - 7.50 HP - 2 Phase, Alu., SS Body, Low Head)
Request Callback
₹ 21291 / Piece Get Latest Price
Product Brochure
| Power | 7.5 HP |
| Country of Origin | Made in India |
| HP | 7.50 HP |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | CI Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
X
Contact Us
Ashwin Ghedia (CEO)
Shree Ram Pump & Pipe
Opp. Bank Of Baroda, Dhebar Road
Rajkot Municipal Corporation, Rajkot - 360001, Gujarat, India
Send Email