V9 OPENWELL PUMP
Pioneers in the industry, we offer horizontal open well pump (v9 blu openwell pump 5.00 hp low head (ss body - alu.)), open well pump (v9 blu horizontal openwell pump 5.00 hp low head (ci body - alu.)), horizontal open well pump (v9 blu openwell pump 3.00 hp low head (ss body - copper)), open well pump (v9 blu horizontal openwell pump 3.00 hp high head (ci body - alu.)), open well pump (v9 blu horizontal openwell pump 3.00 hp low head (ss body - alu.)) and open well pump (v9 blu horizontal openwell pump 3.00 hp low head (ci body - alu.)) from India.
Horizontal Open Well Pump (V9 BLU Openwell Pump 5.00 HP Low Head (SS Body - Alu.))
Request Callback
₹ 18821 / Piece Get Latest Price
Product Brochure
| Power | 5 HP |
| Country of Origin | Made in India |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | SS Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (V9 BLU Horizontal Openwell Pump 5.00 HP Low Head (CI Body - Alu.))
Request Callback
₹ 17716 / Piece Get Latest Price
Product Brochure
| Power | 5 hp |
| Country of Origin | Made in India |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | CI Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Horizontal Open Well Pump (V9 BLU Openwell Pump 3.00 HP Low Head (SS Body - Copper))
Request Callback
₹ 17456 / Piece Get Latest Price
Product Brochure
| Power | 3 HP |
| Country of Origin | Made in India |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | SS Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (V9 BLU Horizontal Openwell Pump 3.00 HP High Head (CI Body - Alu.))
Request Callback
₹ 16481 / Piece Get Latest Price
Product Brochure
| Power | 3 hp |
| Country of Origin | Made in India |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | CI Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (V9 BLU Horizontal Openwell Pump 3.00 HP Low Head (SS Body - Alu.))
Request Callback
₹ 17456 / Piece Get Latest Price
Product Brochure
| Power | 3 HP |
| Country of Origin | Made in India |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | SS Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (V9 BLU Horizontal Openwell Pump 3.00 HP Low Head (CI Body - Alu.))
Request Callback
₹ 16481 / Piece Get Latest Price
Product Brochure
| Power | 3 hp |
| Country of Origin | Made in India |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | CI Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (V9 BLU Horizontal Openwell Pump 5.00 HP Low Head (CI Body - Copper))
Request Callback
₹ 18691 / Piece Get Latest Price
Product Brochure
| Power | 5 hp |
| Country of Origin | Made in India |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | CI Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (V9 BLU Horizontal Openwell Pump 3.00 HP Low Head (CI Body - Copper))
Request Callback
₹ 17456 / Piece Get Latest Price
Product Brochure
| Power | 3 hp |
| Country of Origin | Made in India |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | CI Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (V9 BLU Horizontal Openwell Pump 3.00 HP High Head (CI Body - Copper))
Request Callback
₹ 17976 / Piece Get Latest Price
Product Brochure
| Power | 3 hp |
| Country of Origin | Made in India |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | CI Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (V9 BLU Horizontal Openwell Pump 5.00 HP High Head (CI Body - Alu.))
Request Callback
₹ 18171 / Piece Get Latest Price
Product Brochure
| Power | 5 hp |
| Country of Origin | Made in India |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | CI Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (V9 BLU Horizontal Openwell Pump 5.00 HP Low Head (SS Body - Alu.))
Request Callback
₹ 21031 / Piece Get Latest Price
Product Brochure
| Power | 5 HP |
| Country of Origin | Made in India |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | CI Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Horizontal Open Well Pump (V9 BLU Openwell Pump 5.00 HP Low Head (SS Body - Copper))
Request Callback
₹ 23046 / Piece Get Latest Price
Product Brochure
| Power | 5 HP |
| Country of Origin | Made in India |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | SS Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Horizontal Open Well Pump (V9 BLU Openwell Pump 3.00 HP Low Head (SS Body - Alu.))
Request Callback
₹ 16351 / Piece Get Latest Price
Product Brochure
| Power | 3 HP |
| Country of Origin | Made in India |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | SS Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (V9 BLU Horizontal Openwell Pump 5.00 HP High Head (CI Body - Copper))
Request Callback
₹ 23046 / Piece Get Latest Price
Product Brochure
| Power | 5 hp |
| Country of Origin | Made in India |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | CI Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
SHREE RAM BLU OPENWELL (SHREE RAM BLU Horizontal Openwell Pump)
Request Callback
₹ 9677.5 / Piece Get Latest Price
Product Brochure
| Brand | Texmo |
| Motor Power | 2HP |
| Type | Jet Pump |
| Motor Horsepower | 2 HP |
| Capacity | 2 |
| Power | 1 hp |
| Motor Phase | Single Phase |
| Motor Phase/Stage | Three Phase |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed double side carbon pads for higher wear resistance.
- No suction and priming problem.
- Extremely tough and hard-wearing lubricated journal bearing are used.
- Dynamically balanced rotating parts ensures minimum vibration and longer life.
- Motor designed with higher cooling effect ensures longer life.
- Motor body available in SS 304 & Cast iron.
- Designed for wide voltage fluctuation.
- High operating efficiency.
Open Well Pump Set (C.I. Body) (SHREE RAM BLU Horizontal Openwell Pump)
Request Callback
₹ 9277.5 / Piece Get Latest Price
Product Brochure
| Power | 2 hp |
| Discharge Range | 60 LPM |
| Motor Phase | Single Phase |
| Voltage | 220V |
| Material | MS |
| Motor Speed | 2800 RPM |
| Operating Current | 5Amps |
| Type | Electric |
| Pump Model | V5 |
| Country of Origin | Made in India |
| Brand Name | Blue Label |
| NRV | 1x1 inch |
| Overall Efficiency | 50% |
| Category | B |
| Marketed By | Shree Ram Pump And Pipe |
| Max Head | 500 Foot |
Minimum order quantity: 10 Piece
- Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (V9 BLU Horizontal Openwell Pump 5.00 HP High Head (SS Body - Copper))
Request Callback
₹ 20901 / Piece Get Latest Price
Product Brochure
| Power | 5 HP |
| Country of Origin | Made in India |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | SS Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Dedko Pump (SHREE RAM BLU Horizontal Openwell Pump)
Request Callback
₹ 8777.5 / Piece Get Latest Price
Product Brochure
| Power | 2 HP |
| Power Source | Electric |
| Product Type | Agricultural Water Pump |
| Motor Phase | Three Phase |
| Automation Grade | Automatic |
Minimum order quantity: 10 Piece
We are a leading Manufacturer, Wholesaler, Distributor, Supplier and Trader of a wide and Excellent Quality range of Submersible Pumps, Self-Priming Pumps, Open Well Pumps, Monoblock Pumps, Pipes, Motors and Cables, Etc...
Openwell Pump (SHREE RAM BLU Horizonatl Openwell Pump)
Request Callback
₹ 14027.5 / Piece Get Latest Price
Product Brochure
| Type | Horizontal |
| Impeller | SS |
| Motor Phase | Single Phase |
| Applications | Domestic |
| Winding | Copper Rotter |
| STAGE | 1 |
| Capacity | HIGH |
| Motor Speed | 1200RPM |
| Usage/Application | Domestic/ Industrial |
| Country of Origin | Made in India |
| Power | 2 HP |
| Motor Horsepower | 1.5 HP |
Minimum order quantity: 10 Piece
We are engaged in offering Quality Products to our clients. Our range of all products is widely appreciated by our clients.
SELF PRIMING WITH OPENWELL (SHREE RAM BLU Horizontal Openwell Pump)
Request Callback
₹ 8477.5 / Piece Get Latest Price
Product Brochure
| Motor Power | 2 HP |
| Phase | Single Phase |
| Pump Type | Centrifugal Pump |
| Material | Iron |
| Discharge Pressure | 500 LPH |
| Max Flow Rate | 10 LPM |
| Color | Blue |
| Type | Horizontal |
| Power Source | Electric |
| Country of Origin | Made in India |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (V9 BLU Horizontal Openwell Pump 10.00 HP High Head (CI Body - Copper))
Request Callback
₹ 19777.5 / Piece Get Latest Price
Product Brochure
| Power | 10 HP |
| Country of Origin | Made in India |
| HP | 10.00 HP |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | CI Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (V9 BLU Horizontal Openwell Pump 10.00 HP Low Head (CI Body - Copper))
Request Callback
₹ 19277.5 / Piece Get Latest Price
Product Brochure
| Power | 10 HP |
| Country of Origin | Made in India |
| HP | 10.00 HP |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | CI Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Horizontal Open Well Pump (V9 BLU Openwell Pump 5.00 HP High Head (SS Body - Alu.))
Request Callback
₹ 21031 / Piece Get Latest Price
Product Brochure
| Power | 5 HP |
| Country of Origin | Made in India |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | SS Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Horizontal Open Well Pump (V9 BLU Openwell Pump 10.00 HP Low Head (CI Body - Copper))
Request Callback
₹ 31691 / Piece Get Latest Price
Product Brochure
| Power | 10 HP |
| Country of Origin | Made in India |
| HP | 10.00 HP |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | CI Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (V9 BLU Horizontal Openwell Pump 10.00 HP High Head (CI Body - Alu.))
Request Callback
₹ 29871 / Piece Get Latest Price
Product Brochure
| Power | 10 HP |
| Country of Origin | Made in India |
| HP | 10.00 HP |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | CI Body |
| Pump Type | OPEN WELL |
| Dimension | 37 x 33 x 21 cm |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (V9 BLU Horizontal Openwell Pump 6.50 HP High Head (CI Body - Copper))
Request Callback
₹ 21291 / Piece Get Latest Price
Product Brochure
| Power | 6.5 HP |
| Country of Origin | Made in India |
| HP | 6.50 HP |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | CI Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (V9 BLU Horizontal Openwell Pump 5.00 HP Low Head (SS Body - Copper))
Request Callback
₹ 20901 / Piece Get Latest Price
Product Brochure
| Power | 5 HP |
| Country of Origin | Made in India |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | SS Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (V9 BLU Horizontal Openwell Pump 6.50 HP High Head (CI Body - Alu.))
Request Callback
₹ 19276 / Piece Get Latest Price
Product Brochure
| Power | 6.5 HP |
| Country of Origin | Made in India |
| HP | 6.50 HP |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | CI Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (V9 BLU Horizontal Openwell Pump 6.50 HP Low Head (SS Body - Copper))
Request Callback
₹ 20446 / Piece Get Latest Price
Product Brochure
| Power | 6.5 HP |
| Country of Origin | Made in India |
| HP | 6.50 HP |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | SS Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Horizontal Open Well Pump (V9 BLU Openwell Pump 3.00 HP High Head (SS Body - Copper))
Request Callback
₹ 19146 / Piece Get Latest Price
Product Brochure
| Power | 3 HP |
| Country of Origin | Made in India |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | SS Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Horizontal Open Well Pump (V9 BLU Openwell Pump 5.00 HP High Head (SS Body - Copper))
Request Callback
₹ 20901 / Piece Get Latest Price
Product Brochure
| Power | 5 HP |
| Country of Origin | Made in India |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | SS Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Horizontal Open Well Pump (V9 BLU Openwell Pump 7.50 HP High Head (SS Body - Copper))
Request Callback
₹ 23956 / Piece Get Latest Price
Product Brochure
| Motor Horsepower | 7.5 HP |
| Country of Origin | Made in India |
| HP | 7.50 HP |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | SS Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (V9 BLU Horizontal Openwell Pump 3.00 HP Low Head (SS Body - Copper))
Request Callback
₹ 17326 / Piece Get Latest Price
Product Brochure
| Power | 3 HP |
| Country of Origin | Made in India |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | SS Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (V9 BLU Horizontal Openwell Pump 6.50 HP Low Head (CI Body - Copper))
Request Callback
₹ 19991 / Piece Get Latest Price
Product Brochure
| Power | 6.5 HP |
| Country of Origin | Made in India |
| HP | 6.50 HP |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | CI Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Copper Rotor Open Well Submersible Pump (SHREE RAM BLU Horizontal Openwell Pump)
Request Callback
₹ 20901 / Piece Get Latest Price
Product Brochure
| Power | 5 hp |
| Type | Horizontal |
| Brand | RAM PUMP-PIPE |
| Discharge Outlet Size | 2.5 |
| Capacity | Depends on HP |
| Usage/Application | Agriculture use |
| Voltage | 230 c |
| Country of Origin | Made in India |
| Phase | Single Phase |
| Motor Phase | Three Phase |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Horizontal Open Well Pump (V9 BLU Openwell Pump 3.00 HP High Head (SS Body - Alu.))
Request Callback
₹ 14400.75 / Piece Get Latest Price
Product Brochure
| Power | 3 HP |
| Country of Origin | Made in India |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | SS Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (V9 BLU Horizontal Openwell Pump 3.00 HP High Head (SS Body - Alu.))
Request Callback
₹ 18430.75 / Piece Get Latest Price
Product Brochure
| Power | 3 HP |
| Country of Origin | Made in India |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | CI Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (V9 BLU Horizontal Openwell Pump 3.00 HP High Head (SS Body - Copper))
Request Callback
₹ 15635.75 / Piece Get Latest Price
Product Brochure
| Power | 3 HP |
| Country of Origin | Made in India |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | SS Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (V9 BLU Horizontal Openwell Pump 7.50 HP Low Head (CI Body - Alu.))
Request Callback
₹ 25385.75 / Piece Get Latest Price
Product Brochure
| Power | 7.5 hp |
| Country of Origin | Made in India |
| HP | 7.50 HP |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | CI Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (V9 BLU Horizontal Openwell Pump 7.50 HP Low Head (CI Body - Copper))
Request Callback
₹ 26750.75 / Piece Get Latest Price
Product Brochure
| Power | 7.5 hp |
| Country of Origin | Made in India |
| HP | 7.50 HP |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | CI Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
X
Contact Us
Ashwin Ghedia (CEO)
Shree Ram Pump & Pipe
Opp. Bank Of Baroda, Dhebar Road
Rajkot Municipal Corporation, Rajkot - 360001, Gujarat, India
Send Email