V9 RED
Our product range includes a wide range of open well pump (red v9 openwell pump - 7.50 hp - 2 phase, alu., ss body, high head), open well pump (red v9 openwell pump - 7.50 hp - 2 phase, copper, ss body, high head), open well pump (red v9 openwell pump - 5.00 hp - 2 phase, alu., ss body, high head), open well pump (red v9 openwell pump - 5.00 hp - 2 phase, copper, ss body, high head), open well pump (red v9 openwell pump - 3.00 hp - 2 phase, alu., ss body, high head) and open well pump (red v9 openwell pump - 3.00 hp - 2 phase, copper, ss body, high head).
Open Well Pump (RED V9 OpenWell Pump - 7.50 HP - 2 Phase, Alu., SS Body, High Head)
Request Callback
₹ 25028 / Piece Get Latest Price
Product Brochure
| Country of Origin | Made in India |
| Stage | 8 |
| Phase | Three Phase |
| Warranty | 12 months |
| Installation/After Sales Service | Yes |
| Power | 5 HP |
Minimum order quantity: 10 Piece
- Products suitable for 150 mm (6.0") and above bore diameter.
- Radial Flow Pump design.
- Energy efficient Motor HP available from 3.00 HP to 30.0 HP.
- Head range Up to 400 Meters
- Motor Diameter 140 mm.
- Pump Diameter 135 mm.
- Wet type water filled design.
- Suitable for 3 Phase 440 V, 50 Hz AC power supply.
Materials of Construction :
- Stator Shell : Stainless Steel
- Motor Shaft : Stainless Steel
- Motor Stainer : Copper
- Motor Winding : Copper
- Thrust Bearing : Heavy duty thrust bearing
- Motor Bush : Bronze LTB-4
- All CI Parts : Graded Casting
- All Fasteners : Stainless Steel
- Pump Shell : Stainless Steel
- Pump Shaft : Stainless Steel
- Impeller : SS 304
- Diffuser : SS 410
- Pump Stainer : Stainless Steel
- All CI Parts : Graded Casting
- All Fasteners : Stainless Steel
Open Well Pump (RED V9 OpenWell Pump - 7.50 HP - 2 Phase, Copper, SS Body, High Head)
Request Callback
₹ 28043 / Piece Get Latest Price
Product Brochure
| Power | 17.5 HP |
| Country of Origin | Made in India |
| HP | 17.50 HP |
| Stage | 22 |
| Warranty | 12 months |
| Installation/After Sales Service | Yes |
Minimum order quantity: 10 Piece
- Products suitable for 150 mm (6.0") and above bore diameter.
- Radial Flow Pump design.
- Energy efficient Motor HP available from 3.00 HP to 30.0 HP.
- Head range Up to 400 Meters
- Motor Diameter 140 mm.
- Pump Diameter 135 mm.
- Wet type water filled design.
- Suitable for 3 Phase 440 V, 50 Hz AC power supply.
Materials of Construction :
- Stator Shell : Stainless Steel
- Motor Shaft : Stainless Steel
- Motor Stainer : Copper
- Motor Winding : Copper
- Thrust Bearing : Heavy duty thrust bearing
- Motor Bush : Bronze LTB-4
- All CI Parts : Graded Casting
- All Fasteners : Stainless Steel
- Pump Shell : Stainless Steel
- Pump Shaft : Stainless Steel
- Impeller : SS 304
- Diffuser : SS 410
- Pump Stainer : Stainless Steel
- All CI Parts : Graded Casting
- All Fasteners : Stainless Steel
Open Well Pump (RED V9 OpenWell Pump - 5.00 HP - 2 Phase, Alu., SS Body, High Head)
Request Callback
₹ 22348 / Piece Get Latest Price
Product Brochure
| Power | 6.5 HP |
| Bore Size | 6 inch |
| Size | 6 Inch |
| Discharge Range | 100 LPM |
| Head | 100 m |
| Motor Phase | Three Phase |
| Outer Diameter | 6 |
| Number Of Stages | Multi Stage Pump |
| Nominal Voltages | 230 v |
| Machine Dimension | 6 |
| Country of Origin | Made in India |
| Stage | 5 |
Minimum order quantity: 10 Piece
- Products suitable for 150 mm (6.0") and above bore diameter.
- Radial Flow Pump design.
- Energy efficient Motor HP available from 3.00 HP to 30.0 HP.
- Head range Up to 400 Meters
- Motor Diameter 140 mm.
- Pump Diameter 135 mm.
- Wet type water filled design.
- Suitable for 3 Phase 440 V, 50 Hz AC power supply.
Materials of Construction :
- Stator Shell : Stainless Steel
- Motor Shaft : Stainless Steel
- Motor Stainer : Copper
- Motor Winding : Copper
- Thrust Bearing : Heavy duty thrust bearing
- Motor Bush : Bronze LTB-4
- All CI Parts : Graded Casting
- All Fasteners : Stainless Steel
- Pump Shell : Stainless Steel
- Pump Shaft : Stainless Steel
- Impeller : SS 304
- Diffuser : SS 410
- Pump Stainer : Stainless Steel
- All CI Parts : Graded Casting
- All Fasteners : Stainless Steel
Open Well Pump (RED V9 OpenWell Pump - 5.00 HP - 2 Phase, Copper, SS Body, High Head)
Request Callback
₹ 24693 / Piece Get Latest Price
Product Brochure
| Power | 5 HP |
| Country of Origin | Made in India |
| Stage | 6 |
| Phase | Three Phase |
| Warranty | 12 months |
| Installation/After Sales Service | Yes |
Minimum order quantity: 10 Piece
- Products suitable for 150 mm (6.0") and above bore diameter.
- Radial Flow Pump design.
- Energy efficient Motor HP available from 3.00 HP to 30.0 HP.
- Head range Up to 400 Meters
- Motor Diameter 140 mm.
- Pump Diameter 135 mm.
- Wet type water filled design.
- Suitable for 3 Phase 440 V, 50 Hz AC power supply.
Materials of Construction :
- Stator Shell : Stainless Steel
- Motor Shaft : Stainless Steel
- Motor Stainer : Copper
- Motor Winding : Copper
- Thrust Bearing : Heavy duty thrust bearing
- Motor Bush : Bronze LTB-4
- All CI Parts : Graded Casting
- All Fasteners : Stainless Steel
- Pump Shell : Stainless Steel
- Pump Shaft : Stainless Steel
- Impeller : SS 304
- Diffuser : SS 410
- Pump Stainer : Stainless Steel
- All CI Parts : Graded Casting
- All Fasteners : Stainless Steel
Open Well Pump (RED V9 OpenWell Pump - 3.00 HP - 2 Phase, Alu., SS Body, High Head)
Request Callback
₹ 18998 / Piece Get Latest Price
Product Brochure
| Discharge | 20-30 LPM |
| Discharge Range | 30 LPM |
| Motor Phase | Single Phase |
| Head | 15 m |
| Maximum Discharge Flow | 100 LPM |
| Type | Borewell |
| Number Of Stages | Single-stage Pump |
| Country of Origin | Made in India |
| Stage | 6 |
| Power | 5 HP |
Minimum order quantity: 10 Piece
- V-3 Submersible Pumps are high in quality and are known for minimum maintenance requirements. As compared to normal surface pumps, these pumps are better for borehole pumping process. These pumps require less space and produce low noise. Our pumps are used for domestic, agricultural and industrial purposes for pulling up of water from underground. Considering the quality and power saving feature of our pumps, we offer these at competitive prices.
- Wide Range of pumps for appropriate selection as per requirement.
- Options are available for different pipe sizes in each rating to satisfy individual’s need.
- Suitable in wide voltage variation with greater performance even in low voltage.
Specifications :
- Power Range : 0.5 HP to 2.0 HP
- Power Supply : 230 Volts
- Total Head : Upto 133 mtrs
- Flow Rate : Upto 37 Ipm
- Pipe Size : 25 mm to 32 mm
- Pole/Syn. Speed : 2 Pole/2800 rpm.
- Direction of Rotation : Anticlock wise when Viewed from front top.
- Suitable Bore Size : 75 mm & 80 mm
- Outlate – 1.0”
Application
- Unclear & Crocked Borewell 3" Inches
- Cooling & Pressure Boosting System in industrial Application
- Drinking Water needs in Cities & Villages in House
- waterworks in small Farms
Open Well Pump (RED V9 OpenWell Pump - 3.00 HP - 2 Phase, Copper, SS Body, High Head)
Request Callback
₹ 20941 / Piece Get Latest Price
Product Brochure
| Power (HP) | 15 HP |
| Power | 15 HP |
| Number of Stages | 8 |
| Outlet Size | 150 mm (6 Inch) |
| Maximum Head | Up to 465 mtrs |
| Pump Body Material | Stainless Steel |
| Country of Origin | Made in India |
| Phase | Three Phase |
| Warranty | 12 months |
| HP | 15.00 HP |
| Stage | 8 |
| Installation/After Sales Service | Yes |
Minimum order quantity: 5 Piece
- V-3 Submersible Pumps are high in quality and are known for minimum maintenance requirements. As compared to normal surface pumps, these pumps are better for borehole pumping process. These pumps require less space and produce low noise. Our pumps are used for domestic, agricultural and industrial purposes for pulling up of water from underground. Considering the quality and power saving feature of our pumps, we offer these at competitive prices.
- Wide Range of pumps for appropriate selection as per requirement.
- Options are available for different pipe sizes in each rating to satisfy individual’s need.
- Suitable in wide voltage variation with greater performance even in low voltage.
Specifications :
- Power Range : 0.5 HP to 2.0 HP
- Power Supply : 230 Volts
- Total Head : Upto 133 mtrs
- Flow Rate : Upto 37 Ipm
- Pipe Size : 25 mm to 32 mm
- Pole/Syn. Speed : 2 Pole/2800 rpm.
- Direction of Rotation : Anticlock wise when Viewed from front top.
- Suitable Bore Size : 75 mm & 80 mm
- Outlate – 1.0”
Application
- Unclear & Crocked Borewell 3" Inches
- Cooling & Pressure Boosting System in industrial Application
- Drinking Water needs in Cities & Villages in House
- waterworks in small Farms
Open Well Pump (RED V9 OpenWell Pump - 7.50 HP - 2 Phase, Alu., SS Body, Low Head)
Request Callback
₹ 22884 / Piece Get Latest Price
Product Brochure
| Power | 17.5 HP |
| Country of Origin | Made in India |
| HP | 17.50 HP |
| Stage | 12 |
| Warranty | 12 months |
| Installation/After Sales Service | Yes |
Minimum order quantity: 10 Piece
- Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (RED V9 OpenWell Pump - 7.50 HP - 2 Phase, Copper, SS Body, Low Head)
Request Callback
₹ 25832 / Piece Get Latest Price
Product Brochure
| Power (HP) | 7.5 HP |
| Phase | Three Phase |
| Stages | 40 |
| Motor Phase | Three Phase |
| Warranty | 12 months |
| Power | 7.5 HP |
| Installation/After Sales Service | Yes |
| Country of Origin | Made in India |
| BRAND | Shree Ram Red |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (RED V9 OpenWell Pump - 7.50 HP - 3 Phase, Copper, SS Body, High Head)
Request Callback
₹ 28043 / Piece Get Latest Price
Product Brochure
| Power | 7.5 HP |
| Country of Origin | Made in India |
| HP | 7.50 HP |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | CI Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (RED V9 OpenWell Pump - 10.00 HP - 3 Phase, Alu., SS Body, Low Head)
Request Callback
₹ 26904 / Piece Get Latest Price
Product Brochure
| Power | 7.5 HP |
| Country of Origin | Made in India |
| HP | 7.50 HP |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | CI Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (RED V9 OpenWell Pump - 5.00 HP - 2 Phase, Copper, SS Body, Low Head)
Request Callback
₹ 22482 / Piece Get Latest Price
Product Brochure
| Power | 5 HP |
| Country of Origin | Made in India |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | CI Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (RED V9 OpenWell Pump - 3.00 HP - 3 Phase, Alu., SS Body, Low Head)
Request Callback
₹ 20070 / Piece Get Latest Price
Product Brochure
| Power | 3 HP |
| Country of Origin | Made in India |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | CI Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (RED V9 OpenWell Pump - 3.00 HP - 2 Phase, Copper, SS Body, Low Head)
Request Callback
₹ 22013 / Piece Get Latest Price
Product Brochure
| Country of Origin | Made in India |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | CI Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
| Power | 5 HP |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (RED V9 OpenWell Pump - 10.00 HP - 3 Phase, Alu., SS Body, Low Head)
Request Callback
₹ 23889 / Piece Get Latest Price
Product Brochure
| Power | 10 HP |
| Country of Origin | Made in India |
| HP | 10.00 HP |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | CI Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (RED V9 OpenWell Pump - 10.00 HP - 3 Phase, Copper, SS Body, Low Head)
Request Callback
₹ 32599 / Piece Get Latest Price
Product Brochure
| Power | 10 HP |
| Country of Origin | Made in India |
| HP | 10.00 HP |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | CI Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (RED V9 OpenWell Pump - 10.00 HP - 3 Phase, Copper, SS Body, Low Head)
Request Callback
₹ 29651 / Piece Get Latest Price
Product Brochure
| Power | 3 HP |
| Country of Origin | Made in India |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | CI Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (RED V9 OpenWell Pump - 7.50 HP - 3 Phase, Alu., SS Body, Low Head)
Request Callback
₹ 22884 / Piece Get Latest Price
Product Brochure
| Power | 10 HP |
| Country of Origin | Made in India |
| HP | 10.00 HP |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | CI Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (RED V9 OpenWell Pump - 3.00 HP - 3 Phase, Copper, SS Body, Low Head)
Request Callback
₹ 22013 / Piece Get Latest Price
Product Brochure
| Power | 10 HP |
| Country of Origin | Made in India |
| HP | 10.00 HP |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | CI Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (RED V9 OpenWell Pump - 5.00 HP - 3 Phase, Copper, SS Body, High Head)
Request Callback
₹ 24693 / Piece Get Latest Price
Product Brochure
| Power | 7.5 HP |
| Country of Origin | Made in India |
| HP | 7.50 HP |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | CI Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (RED V9 OpenWell Pump - 3.00 HP - 3 Phase, Copper, SS Body, High Head)
Request Callback
₹ 20941 / Piece Get Latest Price
Product Brochure
| Power | 7.5 HP |
| Country of Origin | Made in India |
| HP | 7.50 HP |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | CI Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (RED V9 OpenWell Pump - 3.00 HP - 3 Phase, Alu., SS Body, High Head)
Request Callback
₹ 18998 / Piece Get Latest Price
Product Brochure
| Power | 7.5 HP |
| Country of Origin | Made in India |
| HP | 7.50 HP |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | CI Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (RED V9 OpenWell Pump - 5.00 HP - 3 Phase, Alu., SS Body, High Head)
Request Callback
₹ 22348 / Piece Get Latest Price
Product Brochure
| Power | 7.5 HP |
| Country of Origin | Made in India |
| HP | 7.50 HP |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | CI Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (RED V9 OpenWell Pump - 7.50 HP - 3 Phase, Alu., SS Body, High Head)
Request Callback
₹ 25028 / Piece Get Latest Price
Product Brochure
| Power | 3 HP |
| Country of Origin | Made in India |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | CI Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (RED V9 OpenWell Pump - 10.00 HP - 3 Phase, Copper, SS Body, High Head)
Request Callback
₹ 31795 / Piece Get Latest Price
Product Brochure
| Power | 5 HP |
| Country of Origin | Made in India |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | CI Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (RED V9 OpenWell Pump - 10.00 HP - 3 Phase, Alu., SS Body, High Head)
Request Callback
₹ 26033 / Piece Get Latest Price
Product Brochure
| Power | 5 HP |
| Country of Origin | Made in India |
| Application | Agriculture, Industrial |
| Material | Copper |
| Material Type | CI Body |
| Dimension | 37 x 33 x 21 cm |
| Pump Type | OPEN WELL |
| Warranty | 12 months |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (RED V9 OpenWell Pump - 7.50 HP - 3 Phase, Copper, SS Body, Low Head)
Request Callback
₹ 25832 / Piece Get Latest Price
Product Brochure
| Power Rating | 7.5 HP |
| Power | 7.5 hp |
| Phase | Three Phase |
| Brand | SHREE RAM RED |
| Type | Horizontal |
| Motor Phase | Three Phase |
| Discharge Range | Up to 1840 LPM |
| Head Range | Up to 60 mtrs |
| Outlet Size | 25 x 25 to 100 x 100 mm |
| Body Material | Stainless Steel |
| Application | Agriculture, Construction, Industrial, Irrigation, Drip Irrigation, Sprinkler System, Water Supply, Fountain, Domestic |
| Speed | 2800 rpm |
Minimum order quantity: 10 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (RED V9 OpenWell Pump - 5.00 HP - 3 Phase, Copper, SS Body, Low Head)
Request Callback
₹ 22482 / Piece Get Latest Price
Product Brochure
| Power Rating | 5 HP |
| Power | 5 hp |
| Phase | Three Phase |
| Brand | SHREE RAM RED |
| Type | Horizontal |
| Motor Phase | Three Phase |
| Motor Phase/Stage | Three Phase |
| Discharge Range | Up to 1840 LPM |
| Head Range | Up to 60 mtrs |
| Pump Material | Stainless Steel |
| Suction Size | 2.5 in |
| Outlet Size | 25 x 25 to 100 x 100 mm |
| Usage | Industrial, Agriculture, Domestic |
| Body Material | Stainless Steel |
| Application | Water Supply, Construction, Irrigation, Domestic, Industrial, Fountain, Agriculture, Drip Irrigation, Sprinkler System |
| Speed | 2800 rpm |
| Voltage | 230 V |
| Country of Origin | Made in India |
Minimum order quantity: 5 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (RED V9 OpenWell Pump - 5.00 HP - 2 Phase, Alu., SS Body, Low Head)
Request Callback
₹ 20204 / Piece Get Latest Price
Product Brochure
| Power Rating | 5 HP |
| Phase | Two Phase |
| Brand | SHREE RAM RED |
| Motor Horsepower | 5 HP |
| Motor Phase | Two Phase |
| Discharge Range | Up to 1840 LPM |
| Head Range | Up to 60 mtrs |
| Outlet Size | 25 x 25 to 100 x 100 mm |
| Body Material | Stainless Steel |
| Application | Construction, Irrigation, Sprinkler System, Fountain, Agriculture, Water Supply, Drip Irrigation, Domestic, Industrial |
| Speed | 2800 rpm |
| Country of Origin | Made in India |
Minimum order quantity: 5 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
Specially designed double side carbon pads for higher wear resistance.
No suction and priming problem.
Extremely tough and hard-wearing lubricated journal bearing are used.
Dynamically balanced rotating parts ensures minimum vibration and longer life.
Motor designed with higher cooling effect ensures longer life.
Motor body available in SS 304 & Cast iron.
Designed for wide voltage fluctuation.
High operating efficiency.
Open Well Pump (RED V9 OpenWell Pump - 3.00 HP - 2 Phase, Alu., SS Body, Low Head)
Request Callback
₹ 20070 / Piece Get Latest Price
Product Brochure
| Power Rating | 3 HP |
| Phase | Two Phase |
| Brand | SHREE RAM RED |
| Motor Horsepower | 3 HP |
| Type | Horizontal |
| Motor Phase | Two Phase |
| Discharge Range | Up to 1840 LPM |
| Head Range | Up to 60 mtrs |
| Outlet Size | 25 x 25 to 100 x 100 mm |
| Body Material | Stainless Steel |
| Application | Construction, Water Supply, Irrigation, Drip Irrigation, Sprinkler System, Industrial, Agriculture, Fountain, Domestic |
| Speed | 2800 rpm |
| Voltage | 230 V |
| Country of Origin | Made in India |
Minimum order quantity: 5 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
Open Well Pump (RED V9 OpenWell Pump - 5.00 HP - 3 Phase, Alu., SS Body, Low Head)
Request Callback
₹ 20204 / Piece Get Latest Price
| Power | 5 hp |
| Power Rating | 5 HP |
| Phase | Three Phase |
| Head Range | Up to 60 mtrs |
| Type | Horizontal |
| Motor Phase | Three Phase |
| Discharge Range | Up to 1840 LPM |
| Pump Type | Horizontal |
| Pump Material | Cast Iron |
| Outlet Size | 25 x 25 to 100 x 100 mm |
| Brand | SHREE RAM RED |
| Body Material | Stainless Steel |
| Application | Domestic, Construction, Sprinkler System, Water Supply, Irrigation, Drip Irrigation, Fountain, Agriculture, Industrial |
| Speed | 2800 rpm |
| Voltage | 230 V |
| Warranty | 1 year |
| Country of Origin | Made in India |
Minimum order quantity: 5 Piece
Openwell Submersible Pump sets are ideally suitable for ideally suitable for openwells or tanks where a wide fluctuation of water level occur. This works under water and rest at the bottom of the well. Prime mover is rewindable, water – cooled motor. Specially designed water lubricated bearing are used to withstand the axial thrust loads with minimum wear and tear. The stator is wound with special waterproof synthetic film insulated copper winding wires and made up of low watt loss silicon steel laminations assembled under pressure and rigidly locked. Motor sealing is made by polymers, ‘O’ rings, oil seals and sand guard to avoid ingress of well water/salt into the motor. Pressure equalizing rubber diaphragm is provided to guard the motor from pressure and volume variation of water as detailed in our operator’s manual. Three phase motor requires an adequate motor protection control panel.
- Specially designed to start in low voltage and sustain in high voltage fluctuations.
- High electrical and mechanical efficiency.
- Higher heat dissipation.
- Dynamically balanced rotor and other rotating parts for uniform clearance.
- Specially designed bearing to withstand axial thrust loads.
- Designed for high voltage fluctuations.
- Noise free operation.
- Modular design and all parts are easily interchangeable.
- Energy Efficient Models.
- Higher efficiency resulting in lower operating cost.
- Type of Product: Open Well Submersible Pump
- Material: Copper
- Weight: 12 Kg
- Dimension: 37 x 33 x 21 cm
- Country of Origin: India
- Colour: Multi Colour
- Generic Name: Water Pump and Motor
- Agriculture Farm
- Industries Water Supply
- Sprinkler & Drip Irrigation
- Gardens
- Residential Complex
- Hospitals
- Water Treatment Plant
X
Contact Us
Ashwin Ghedia (CEO)
Shree Ram Pump & Pipe
Opp. Bank Of Baroda, Dhebar Road
Rajkot Municipal Corporation, Rajkot - 360001, Gujarat, India
Send Email